BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00277891BTC
Stokta
TAURKENAM
TAURKENAM RM400 4U server chassis 3×5.25 bays CEB ATX mATX Mini-ITX
A 4U rackmount server chassis with three 5.25" front bays supporting CEB, ATX, mATX and Mini-ITX motherboards
- Supports SSI-CEB, ATX, mATX and Mini-ITX motherboards
- Three 5.25" front bays for optical or hot-swap drives
- Seven standard-profile PCI/PCIe expansion slots
- Lockable front door secures internal components
- Front USB 3.1 Gen 1 port at 5Gbps with USB 2.0/1.1 backward compatibility
4U Rackmount Server Chassis
The TAURKENAM RM400 is a 4U rackmount server chassis built to hold SSI-CEB, ATX, micro-ATX and Mini-ITX motherboards. It accepts ATX or mini-redundant power supplies up to 160 mm deep and provides seven standard-profile PCI or PCIe expansion slots. A lockable front door secures the three 5.25-inch drive bays and the front-panel USB 3.1 Gen 1 port.
Suited For And Not Suited For
This chassis suits builders who need a 4U rack enclosure with three 5.25-inch bays for optical drives or hot-swap cages and who require support for SSI-CEB motherboards. It is not suited for builds that need more than seven expansion slots, for systems requiring front-panel USB speeds beyond 5 Gbps, or for installations where the power supply depth must exceed 160 mm.
Deciding Specification
The maximum motherboard form factor supported is SSI-CEB; larger boards will not fit. The seven-slot limit and 160 mm power-supply depth are fixed by the chassis design. The three 5.25-inch bays and single 5 Gbps USB 3.1 Gen 1 port complete the core connectivity.
Öne çıkanlar
- Supports SSI-CEB, ATX, mATX and Mini-ITX motherboards
- Three 5.25" front bays for optical or hot-swap drives
- Seven standard-profile PCI/PCIe expansion slots
- Lockable front door secures internal components
- Front USB 3.1 Gen 1 port at 5Gbps with USB 2.0/1.1 backward compatibility
Teknik özellikler
Bu ürün için henüz yayınlanmış teknik özellik yok.
Bu ürünle ilgili sorular
How do I mount the motherboard and avoid the common alignment mistake?
Align the board to the SSI-CEB standoff pattern and use all nine mounting holes; the lower-right hole is often missed because it sits behind the power-supply bracket.
Which parts will need replacement after extended use?
The front-door key-lock latch and the USB 3.1 Gen 1 port are the only moving or plug-in items; both can be swapped without removing the motherboard.
What thermal limit appears first during continuous load?
The 160 mm power-supply depth restriction caps airflow; a deeper supply blocks the front-to-rear path and raises internal temperatures before the seven-slot backplane does.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
