Tripp Lite
Tripp Lite P568-20M-FBR fibre optic cable 65 ft HDMI 2.0 4K 60 Hz 18 Gbps
Active fibre-optic HDMI 2.0 cable carries 4K 60 Hz 18 Gbps video over 65 ft with EMI/RFI protection and CEC support
- ColorBlack
- Length65 ft
- Connector DetailConnector on First End:HDMI Male Digital Audio/Video Connect
- FeaturesFeatures:Active Consumer Electronics Control (CEC) EMI/RF Pr
- Ultra HD 4K at 60 Hz with 18 Gbps bandwidth
- Fiber optic design reaches 65 ft without signal loss
- Active cable draws power from the source device for plug-and-play setup
- EMI and RF shielding prevents line noise from disrupting audio and video
- Supports 4:4:4 chroma subsampling for full HDR colour fidelity
What this cable delivers
The Tripp Lite P568-20M-FBR is an active fiber optic HDMI 2.0 cable rated for 18 Gbps bandwidth. It carries 4K resolution at 60 Hz with 4:4:4 chroma subsampling and supports HDCP 2.2 for protected content. Home-theater owners, digital-signage installers and gamers who need a 65 ft link without signal loss are the target users.
Build and daily use
Optical fiber strands replace copper so the 20 m run stays free of EMI and RF interference. The flexible black jacket routes easily through conduit or behind walls while the HDMI male connectors on both ends plug directly into source and display. Power is drawn from the connected devices so no external adapter is required, and CEC plus EDID pass-through keep device control and display handshake working normally.
Check before ordering
Verify that both source and display have full-size HDMI 2.0 ports able to supply enough bus power for the active circuitry. Confirm the 65 ft length matches the exact path distance; excess slack cannot be coiled tightly without risking fiber bend-radius limits. Ensure the installation route can accommodate the connector heads and that no intermediate repeaters or couplers are needed.
Öne çıkanlar
- Ultra HD 4K at 60 Hz with 18 Gbps bandwidth
- Fiber optic design reaches 65 ft without signal loss
- Active cable draws power from the source device for plug-and-play setup
- EMI and RF shielding prevents line noise from disrupting audio and video
- Supports 4:4:4 chroma subsampling for full HDR colour fidelity
Teknik özellikler
| Brand | Tripp Lite |
|---|---|
| Model | P568-20M-FBR |
| Color | Black |
| Length | 65 ft |
| Connector Detail | Connector on First End:HDMI Male Digital Audio/Video Connector on Second End:HDMI Male Digital Audio/Video |
| Features | Features:Active Consumer Electronics Control (CEC) EMI/RF Protection Extended Display Identification Data (EDID) Flexible |
| Kargo ağırlığı | 0.65 kg |
| Koli boyutu | 200 × 190 × 65 mm |
Bu ürünle ilgili sorular
What bandwidth does the HDMI 2.0 interface on this cable actually deliver?
The cable is rated for 18 Gbps, which is the full HDMI 2.0 bandwidth ceiling, so 4K at 60 Hz with 4:4:4 colour reaches the display without compression.
What physical clearance does the 65 ft fibre run need behind a rack or through conduit?
The optical strand is flexible and carries male HDMI plugs on both ends, so it routes like a standard cable but cannot be cut or field-terminated; plan the path for the fixed 65 ft length and the connector heads.
How is the active fibre cable powered, and what is the common mistake?
It draws power from the HDMI source device itself — no external adapter is required. The frequent error is plugging the ends backwards; the connectors are marked source and display and must match the gear.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
$39,99
0.00050902BTC
Stokta