SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00499382BTC
Stokta
V-color
V-color OTMXFAL1660830WWK 32GB DDR5 6000 CL30 desktop RAM
32 GB dual-channel DDR5 kit at 6000 MT/s CL30 with built-in OLED display and RGB lighting, optimized for AMD EXPO
- Capacity32GB (2 x 16GB)
- SpeedDDR5 6000 (PC5 48000)
- CAS LatencyCL30
- Timing30-38-38-76
- Multi-channel KitDual Channel Kit
- ChipsetSK Hynix
- Real-time system stats on built-in OLED display without software
- 32 GB dual-channel kit at 6000 MT/s with CL30 latency
- AMD EXPO profile enables rated speed on compatible motherboards
- Premium SK Hynix ICs binned for stability at 1.35 V
- Multi-zone ARGB lighting customizable via motherboard RGB software
AMD EXPO DDR5 Kit
This 32 GB dual-channel kit uses two 16 GB modules rated at 6000 MT/s with CL30 30-38-38-76 timings at 1.35 V. It is built on SK Hynix ICs and carries AMD EXPO certification for one-click overclocking on compatible AMD motherboards. A patented OLED panel on each stick shows the active EXPO profile, capacity, speed, voltage, temperature and timings without any software.
Sustained Load Behaviour
When EXPO is enabled the kit runs at its rated 6000 MT/s continuously, delivering the bandwidth needed for long rendering or compilation sessions. Without EXPO the modules fall back to the standard 4800 MT/s speed, so the higher throughput is only available when the profile is active. Tight 30-38-38-76 timings help maintain low latency across extended workloads.
Thermals Noise and Power
The modules operate at 1.35 V, a modest voltage for DDR5 at this frequency, which limits heat output during normal use. The OLED display draws minimal power and adds no audible noise. No fan or active cooling is present, so the kit runs silently while the aluminium heatspreader dissipates heat passively.
Öne çıkanlar
- Real-time system stats on built-in OLED display without software
- 32 GB dual-channel kit at 6000 MT/s with CL30 latency
- AMD EXPO profile enables rated speed on compatible motherboards
- Premium SK Hynix ICs binned for stability at 1.35 V
- Multi-zone ARGB lighting customizable via motherboard RGB software
Teknik özellikler
| Brand | V-Color |
|---|---|
| Series | Xfinity + |
| Part Number | OTMXFAL1660830KWK |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL30 |
| Timing | 30-38-38-76 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | SK Hynix |
| BIOS/Performance Profile | AMD EXPO |
| Color | Black |
| LED Color | RGB |
| Kargo ağırlığı | 0.18 kg |
| Koli boyutu | 153 × 102 × 13 mm |
Bu ürünle ilgili sorular
How much heat or noise should I expect from the 1.35 V DDR5 modules running at 6000 MT/s all day?
The kit runs at 1.35 V with SK Hynix ICs and no active cooling, so it adds minimal heat and makes no noise beyond normal case airflow.
What must my motherboard support for the OLED panel and RGB lighting to work without extra cables?
An AMD chipset board with EXPO support and a standard 5 V ARGB header lets the built-in OLED show real-time stats and the multi-zone RGB sync through motherboard software.
Will the memory still run at 6000 MT/s CL30 if I keep my older AMD motherboard that only boots at 4800 MT/s?
Without enabling the EXPO profile the modules default to 4800 MT/s; you need a board that can load the EXPO preset to reach the rated 6000 MT/s speed.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
