SPARTAN
SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
$1.504,99
0.01938795BTC
Stokta
Western Digital
Western Digital WD3000HLHX VelociRaptor 300GB 10000 RPM 32MB SATA 6.0Gb/s 3.5" internal hard drive
A 300 GB, 10000 RPM desktop drive with 32 MB cache and a SATA 6.0 Gb/s interface for high-performance workloads
- PackagingBare Drive
- InterfaceSATA 6.0Gb/s
- Capacity300GB
- NAND Flash Memory TypeEnterprise
- RPM10000 RPM
- Cache32MB
- 10,000 RPM spindle speed delivers fast data access
- 300 GB capacity stores operating system and core applications
- 32 MB cache buffer accelerates frequent read and write operations
- SATA 6.0 Gb/s interface provides high throughput for desktop workloads
- 5-inch form factor fits standard drive bays with IcePack mounting frame
VelociRaptor 300GB 10000 RPM drive
The Western Digital VelociRaptor WD3000HLHX is a 300GB desktop internal hard drive that spins at 10000 RPM with a 32MB cache. It connects through a SATA 6.0Gb/s interface and fits a standard 3.5 inch bay using the included IcePack mounting frame. The drive is supplied new as a bare unit without retail packaging.
Suits performance-focused desktops, not mass storage
This drive targets enthusiasts and workstations that prioritise low latency and fast sequential access for operating systems, applications or scratch disks. The 300GB capacity and 10000 RPM spindle suit workloads that benefit from quick seek times. Buyers who need more storage space or a lower-cost archive drive should consider higher-capacity alternatives.
300GB capacity with 32MB cache headroom
The 300GB capacity comfortably holds an operating system, core applications and active project files while the 32MB cache smooths burst workloads. Performance scales with the SATA 6.0Gb/s link, though the mechanical spindle ultimately limits sustained throughput. For large media libraries or bulk backups the available space runs out quickly.
Öne çıkanlar
- 10,000 RPM spindle speed delivers fast data access
- 300 GB capacity stores operating system and core applications
- 32 MB cache buffer accelerates frequent read and write operations
- SATA 6.0 Gb/s interface provides high throughput for desktop workloads
- 5-inch form factor fits standard drive bays with IcePack mounting frame
Teknik özellikler
| Brand | WD |
|---|---|
| Series | WD VelociRaptor |
| Model | WD3000HLHX |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 300GB |
| NAND Flash Memory Type | Enterprise |
| RPM | 10000 RPM |
| Cache | 32MB |
| Average Latency | 6Gb/s |
| Features | Killer speed Rock-solid reliability Monstrous capacity Ultra-cool operation IcePack mounting frame Rotary Acceleration Feed Forward (RAFF) NoTouch ramp load technology Environmentally conscious |
| Usage | For Ultimate Performance |
| Form Factor | 3.5" |
| Height (maximum) | 26.10mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 147.00mm |
| Kargo ağırlığı | 0.46 kg |
| Koli boyutu | 150 × 102 × 25 mm |
Bu ürünle ilgili sorular
Does my motherboard need a SATA 6.0Gb/s port to run the WD3000HLHX at full speed?
Yes, a SATA 6.0Gb/s port is required to achieve the 6.0Gb/s interface rate; the drive will fall back to slower SATA speeds on older ports.
Can I keep my existing 3.5" drive cage when installing this 10000 RPM VelociRaptor?
The drive fits a standard 3.5" bay measuring 147.00mm long, 101.60mm wide and 26.10mm high, so most cages accept it without modification.
How do I confirm the WD3000HLHX is operating at 10000 RPM after setup?
Check the reported rotational speed in BIOS or a SMART monitoring tool; it should show 10000 RPM and a SATA 6.0Gb/s link rate.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
Acumen Disc
Acumen Disc H11-SATA150 1-to-11 SATA Duplicator 150MB/s
- Hard Drive Duplicat…
- 1 to 11
$1.633,99
0.02104979BTC
Stokta