Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

A-Tech

A-Tech 16GB DDR4 2666 ECC UDIMM 2Rx8 Server RAM

SKU CH-JCK3-QXA6B

16 GB DDR4 2666 ECC UDIMM module with CL19 latency, 1.20 V operation and 2Rx8 rank for server upgrades

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 16 GB DDR4 2666 ECC UDIMM for server workloads
  • CL19 latency at 1.2 V for stable operation
  • 2Rx8 dual-rank organisation increases memory density
  • 288-pin DIMM fits standard DDR4 server slots
  • Tested replacement for Hynix HMA82GU7DJR8N-VK

16 GB DDR4 ECC UDIMM for servers

This 16 GB DDR4 2666 module adds error-correcting capacity to compatible server and workstation boards. It runs at CL19 latency and 1.20 V, matching standard DDR4 voltage. The unbuffered design suits platforms that accept UDIMM memory.

288-pin DIMM fits standard DDR4 slots

The single-rank 2Rx8 module installs in any DDR4 UDIMM slot without registered-buffer overhead. It frees registered DIMM slots for other configurations and keeps the memory bus unbuffered for lower latency. Verify your system supports unbuffered ECC before ordering.

Low-voltage operation limits heat and noise

At 1.20 V the module draws minimal power, reducing thermal load inside dense chassis. Passive cooling from case airflow is typically sufficient, keeping acoustic impact negligible during sustained workloads.

Βασικά χαρακτηριστικά

  • 16 GB DDR4 2666 ECC UDIMM for server workloads
  • CL19 latency at 1.2 V for stable operation
  • 2Rx8 dual-rank organisation increases memory density
  • 288-pin DIMM fits standard DDR4 server slots
  • Tested replacement for Hynix HMA82GU7DJR8N-VK

Προδιαγραφές

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMA82GU7DJR8N-VK
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesHMA82GU7DJR8N-VK

Ερωτήσεις για αυτό το προϊόν

Does the CL19 latency become a bottleneck when the module runs at 2666 MHz for long periods?

CL19 is the rated timing at 2666 MHz; sustained workloads stay within this specification.

How much heat does the 1.20 V unbuffered DIMM produce during all-day server operation?

Standard DDR4 1.20 V unbuffered modules run cool enough for typical server chassis airflow.

Which motherboard slot and chipset support are required for this 288-pin 2Rx8 ECC UDIMM?

A DDR4 288-pin UDIMM slot with ECC support in the chipset is needed.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.