Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR4 2666 ECC UDIMM 2Rx8 Server RAM

SKU CH-JCK3-QXA6B

16 GB DDR4 2666 ECC UDIMM module with CL19 latency, 1.20 V operation and 2Rx8 rank for server upgrades

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 16 GB DDR4 2666 ECC UDIMM for server workloads
  • CL19 latency at 1.2 V for stable operation
  • 2Rx8 dual-rank organisation increases memory density
  • 288-pin DIMM fits standard DDR4 server slots
  • Tested replacement for Hynix HMA82GU7DJR8N-VK

16 GB DDR4 ECC UDIMM for servers

This 16 GB DDR4 2666 module adds error-correcting capacity to compatible server and workstation boards. It runs at CL19 latency and 1.20 V, matching standard DDR4 voltage. The unbuffered design suits platforms that accept UDIMM memory.

288-pin DIMM fits standard DDR4 slots

The single-rank 2Rx8 module installs in any DDR4 UDIMM slot without registered-buffer overhead. It frees registered DIMM slots for other configurations and keeps the memory bus unbuffered for lower latency. Verify your system supports unbuffered ECC before ordering.

Low-voltage operation limits heat and noise

At 1.20 V the module draws minimal power, reducing thermal load inside dense chassis. Passive cooling from case airflow is typically sufficient, keeping acoustic impact negligible during sustained workloads.

Pluspunten

  • 16 GB DDR4 2666 ECC UDIMM for server workloads
  • CL19 latency at 1.2 V for stable operation
  • 2Rx8 dual-rank organisation increases memory density
  • 288-pin DIMM fits standard DDR4 server slots
  • Tested replacement for Hynix HMA82GU7DJR8N-VK

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMA82GU7DJR8N-VK
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesHMA82GU7DJR8N-VK

Vragen over dit artikel

Does the CL19 latency become a bottleneck when the module runs at 2666 MHz for long periods?

CL19 is the rated timing at 2666 MHz; sustained workloads stay within this specification.

How much heat does the 1.20 V unbuffered DIMM produce during all-day server operation?

Standard DDR4 1.20 V unbuffered modules run cool enough for typical server chassis airflow.

Which motherboard slot and chipset support are required for this 288-pin 2Rx8 ECC UDIMM?

A DDR4 288-pin UDIMM slot with ECC support in the chipset is needed.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.