Black aluminum two-bay 2.5-inch drive enclosure with RAID switch and LED indicators

Acasis

Acasis DT-S2 Aluminum 2-Bay USB 3.0 2.5-Inch Drive Enclosure

SKU CH-BS1F-2Y519

Aluminum two-bay USB 3.0 enclosure holds two 2.5-inch SATA drives up to 2 TB each with RAID 0, 1, JBOD or SPAN modes

ColorBlack
SizeUSB 3.0 2.5"
AC AdapterYes
MaterialAluminum
Internal InterfaceSATA
HDD Count SupportedSingle HDD

Hardware RAID modes selected by a physical switch
USB 3.0 interface delivers up to 5 Gbps transfer speed
Aluminum body dissipates heat without a fan
Two 2.5-inch bays accept SATA drives up to 2 TB each
Tool-free trays let you swap drives in seconds

74,99 $

0.0009535 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 324,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Acasis DT-S2 Dual-Bay USB 3.0 Enclosure

The Acasis DT-S2 is a two-bay aluminium enclosure that accepts 2.5-inch SATA hard drives or SSDs. It connects through a USB 3.0 interface rated at 5 Gbps and includes a hardware RAID switch for RAID 0, RAID 1, JBOD and SPAN modes. An external AC adapter powers the unit and the package supplies a USB cable, screwdriver, screws and a manual.

Suits desktop users wanting hardware RAID without

This enclosure suits users who want hardware RAID 0, RAID 1, JBOD or SPAN on a desktop without installing an internal controller card. It is not for buyers who need more than two drive bays or who require a single-drive capacity above 2 TB per bay.

USB 3.0 5 Gbps interface with SATA drives

The single specification that decides fit is the USB 3.0 connection delivering up to 5 Gbps to two SATA drives. If your workflow demands a faster host link or a different drive protocol, this enclosure will not meet that requirement.

Βασικά χαρακτηριστικά

Hardware RAID modes selected by a physical switch
USB 3.0 interface delivers up to 5 Gbps transfer speed
Aluminum body dissipates heat without a fan
Two 2.5-inch bays accept SATA drives up to 2 TB each
Tool-free trays let you swap drives in seconds

Προδιαγραφές

Brand	Acasis
Model	DT-S2
Color	Black
Size	USB 3.0 2.5"
AC Adapter	Yes
Material	Aluminum
Internal Interface	SATA
HDD Count Supported	Single HDD
Maximum Capacity (per Bay)	Up to 2TB
Features	Hardware configuration: Aluminum body; Imported chips; RAID switch easy hardware switch can be controlled by two sets of four kinds of array mode, safe and convenient.
Package Contents	1. RAID hard disk external enclosure * 1 2. USB3.0 data cable * 1 3. The auxiliary power supply cable * 1 4. Manual * 1 5. Certificate * 1 6. Warranty Card * 1 7. Screwdriver * 1 8. Screw * 6 9. Case * 1

Ερωτήσεις για αυτό το προϊόν

What drive height and interface does each 2.5-inch bay accept?

Each bay takes a 2.5-inch SATA I, II or III hard drive or SSD up to 2 TB per drive.

How do I set the RAID mode before the enclosure is recognised by the operating system?

Power off the unit, slide the hardware RAID switch to the desired mode — RAID 0, RAID 1, JBOD or SPAN — then power on; the mode is fixed until you power down and change the switch again.

The aluminium body acts as a heatsink — does it need any active cooling or periodic cleaning?

No fan is included; the aluminium chassis dissipates heat passively, so just keep the vents clear of dust and ensure airflow around the enclosure.

Επίσης σε αυτό το ράφι