Acasis
Acasis DT-S2 Aluminum 2-Bay USB 3.0 2.5-Inch Drive Enclosure
Aluminum two-bay USB 3.0 enclosure holds two 2.5-inch SATA drives up to 2 TB each with RAID 0, 1, JBOD or SPAN modes
- ColorBlack
- SizeUSB 3.0 2.5"
- AC AdapterYes
- MaterialAluminum
- Internal InterfaceSATA
- HDD Count SupportedSingle HDD
- Hardware RAID modes selected by a physical switch
- USB 3.0 interface delivers up to 5 Gbps transfer speed
- Aluminum body dissipates heat without a fan
- Two 2.5-inch bays accept SATA drives up to 2 TB each
- Tool-free trays let you swap drives in seconds
Acasis DT-S2 Dual-Bay USB 3.0 Enclosure
The Acasis DT-S2 is a two-bay aluminium enclosure that accepts 2.5-inch SATA hard drives or SSDs. It connects through a USB 3.0 interface rated at 5 Gbps and includes a hardware RAID switch for RAID 0, RAID 1, JBOD and SPAN modes. An external AC adapter powers the unit and the package supplies a USB cable, screwdriver, screws and a manual.
Suits desktop users wanting hardware RAID without
This enclosure suits users who want hardware RAID 0, RAID 1, JBOD or SPAN on a desktop without installing an internal controller card. It is not for buyers who need more than two drive bays or who require a single-drive capacity above 2 TB per bay.
USB 3.0 5 Gbps interface with SATA drives
The single specification that decides fit is the USB 3.0 connection delivering up to 5 Gbps to two SATA drives. If your workflow demands a faster host link or a different drive protocol, this enclosure will not meet that requirement.
Přednosti
- Hardware RAID modes selected by a physical switch
- USB 3.0 interface delivers up to 5 Gbps transfer speed
- Aluminum body dissipates heat without a fan
- Two 2.5-inch bays accept SATA drives up to 2 TB each
- Tool-free trays let you swap drives in seconds
Specifikace
| Brand | Acasis |
|---|---|
| Model | DT-S2 |
| Color | Black |
| Size | USB 3.0 2.5" |
| AC Adapter | Yes |
| Material | Aluminum |
| Internal Interface | SATA |
| HDD Count Supported | Single HDD |
| Maximum Capacity (per Bay) | Up to 2TB |
| Features | Hardware configuration: Aluminum body; Imported chips; RAID switch easy hardware switch can be controlled by two sets of four kinds of array mode, safe and convenient. |
| Package Contents | 1. RAID hard disk external enclosure * 1 2. USB3.0 data cable * 1 3. The auxiliary power supply cable * 1 4. Manual * 1 5. Certificate * 1 6. Warranty Card * 1 7. Screwdriver * 1 8. Screw * 6 9. Case * 1 |
Otázky k tomuto produktu
What drive height and interface does each 2.5-inch bay accept?
Each bay takes a 2.5-inch SATA I, II or III hard drive or SSD up to 2 TB per drive.
How do I set the RAID mode before the enclosure is recognised by the operating system?
Power off the unit, slide the hardware RAID switch to the desired mode — RAID 0, RAID 1, JBOD or SPAN — then power on; the mode is fixed until you power down and change the switch again.
The aluminium body acts as a heatsink — does it need any active cooling or periodic cleaning?
No fan is included; the aluminium chassis dissipates heat passively, so just keep the vents clear of dust and ensure airflow around the enclosure.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Western Digital G-DRIVE ArmorATD 5TB portable hard drive SDPH81G005TGBA1D
OWC Gemini Ultra X6 12TB Thunderbolt portable SSD (OWCTB3GMA6X12)
- 12TB
- Thunderbolt



