Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Adafruit Raspberry Pi case smoke base clear top polycarbonate enclosure 93mm x 63mm x 25mm

Adafruit

Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case Smoke Base engineering development tool

SKU CH-Q6F9-P0JWN

Protects Raspberry Pi B+, Pi 2, and Pi 3 boards with a durable polycarbonate smoke-base enclosure featuring a clear top and precise port cutouts

  • TypePrototyping Products
  • Durable protection from ultra-durable, super-glossy polycarbonate construction
  • Fits Raspberry Pi Model B+, Pi 2, Pi 3 Model B, and Pi 3 Model B+
  • Compact 93mm x 63mm x 25mm footprint saves desk space
  • Snap-in base and snug-fitting lid allow quick, tool-free assembly
  • Lightweight 47g design is easy to carry in a bag or toolbox

Protective Case for Pi B+ Through Pi 3 B+

This polycarbonate enclosure fits Raspberry Pi Model B+, Pi 2, Pi 3 Model B and Pi 3 Model B+ boards. The smoke-coloured base and clear lid snap together without tools, giving a secure fit that survives travel in a bag or toolbox. Precise cut-outs keep every port, the camera connector and the display connector accessible while the board stays protected. The Micro SD slot features a bevelled opening for easy card removal.

Ultra-Durable Polycarbonate Build

Super-glossy polycarbonate resists impact and scratches during daily handling. The base measures 93mm by 63mm by 25mm with a 4mm thick lid, and the complete unit weighs 47 grams. Slim openings route power, HDMI, USB, Ethernet and audio cables cleanly. A dedicated gap lets a GPIO ribbon cable exit the case so HATs can be stacked without removing the lid. Camera and display flex cables also have their own slots.

Upgrade From Bare-Board Or Acrylic Shells

Moves the board from an exposed PCB or brittle acrylic shell into a rigid, one-piece enclosure that withstands drops and compression. The snap-on lid can be removed in seconds when frequent HAT swaps or header access are required, then replaced without screws. Builders who need mounting holes, fan cut-outs or support for Pi 4 and later models should choose a different case design.

Βασικά χαρακτηριστικά

  • Durable protection from ultra-durable, super-glossy polycarbonate construction
  • Fits Raspberry Pi Model B+, Pi 2, Pi 3 Model B, and Pi 3 Model B+
  • Compact 93mm x 63mm x 25mm footprint saves desk space
  • Snap-in base and snug-fitting lid allow quick, tool-free assembly
  • Lightweight 47g design is easy to carry in a bag or toolbox

Προδιαγραφές

TypePrototyping Products

Ερωτήσεις για αυτό το προϊόν

Which Raspberry Pi models does the smoke base case support?

It fits Raspberry Pi Model B+, Pi 2, Pi 3 Model B and Pi 3 Model B+ only.

What are the exact external dimensions of the base without the lid?

The base measures 93 mm by 63 mm by 25 mm (3.7 in by 2.5 in by 1.0 in).

How do you secure the Pi inside the case, and what is the common mistake?

The board snaps into the base; the mistake is forcing the lid on before the board is fully seated.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.