Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Adafruit Raspberry Pi case smoke base clear top polycarbonate enclosure 93mm x 63mm x 25mm

Adafruit

Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case Smoke Base engineering development tool

SKU CH-Q6F9-P0JWN

Protects Raspberry Pi B+, Pi 2, and Pi 3 boards with a durable polycarbonate smoke-base enclosure featuring a clear top and precise port cutouts

  • TypePrototyping Products
  • Durable protection from ultra-durable, super-glossy polycarbonate construction
  • Fits Raspberry Pi Model B+, Pi 2, Pi 3 Model B, and Pi 3 Model B+
  • Compact 93mm x 63mm x 25mm footprint saves desk space
  • Snap-in base and snug-fitting lid allow quick, tool-free assembly
  • Lightweight 47g design is easy to carry in a bag or toolbox

Protective Case for Pi B+ Through Pi 3 B+

This polycarbonate enclosure fits Raspberry Pi Model B+, Pi 2, Pi 3 Model B and Pi 3 Model B+ boards. The smoke-coloured base and clear lid snap together without tools, giving a secure fit that survives travel in a bag or toolbox. Precise cut-outs keep every port, the camera connector and the display connector accessible while the board stays protected. The Micro SD slot features a bevelled opening for easy card removal.

Ultra-Durable Polycarbonate Build

Super-glossy polycarbonate resists impact and scratches during daily handling. The base measures 93mm by 63mm by 25mm with a 4mm thick lid, and the complete unit weighs 47 grams. Slim openings route power, HDMI, USB, Ethernet and audio cables cleanly. A dedicated gap lets a GPIO ribbon cable exit the case so HATs can be stacked without removing the lid. Camera and display flex cables also have their own slots.

Upgrade From Bare-Board Or Acrylic Shells

Moves the board from an exposed PCB or brittle acrylic shell into a rigid, one-piece enclosure that withstands drops and compression. The snap-on lid can be removed in seconds when frequent HAT swaps or header access are required, then replaced without screws. Builders who need mounting holes, fan cut-outs or support for Pi 4 and later models should choose a different case design.

Helstu kostir

  • Durable protection from ultra-durable, super-glossy polycarbonate construction
  • Fits Raspberry Pi Model B+, Pi 2, Pi 3 Model B, and Pi 3 Model B+
  • Compact 93mm x 63mm x 25mm footprint saves desk space
  • Snap-in base and snug-fitting lid allow quick, tool-free assembly
  • Lightweight 47g design is easy to carry in a bag or toolbox

Tæknilýsing

TypePrototyping Products

Spurningar um þessa vöru

Which Raspberry Pi models does the smoke base case support?

It fits Raspberry Pi Model B+, Pi 2, Pi 3 Model B and Pi 3 Model B+ only.

What are the exact external dimensions of the base without the lid?

The base measures 93 mm by 63 mm by 25 mm (3.7 in by 2.5 in by 1.0 in).

How do you secure the Pi inside the case, and what is the common mistake?

The board snaps into the base; the mistake is forcing the lid on before the board is fully seated.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.