Black mid-tower PC case with tempered glass side panel and front I/O ports

ASUS

ASUS ProArt PA401 Standard Edition PC case

SKU CH-1D48-WKKMF

Mid-tower chassis for ATX, Micro-ATX and Mini-ITX boards with a 160 mm front fan and 34 mm cable-routing space

Motherboard CompatibilityATX Micro-ATX Mini-ITX
ColorBlack
Case MaterialSteel, ABS plastic, tempered glass (tempered glass version o
With Power SupplyNo
Front Ports2 × USB 3.2 Gen 1 (Type-A) 1 × USB 3.2 Gen 2×2 (Type-C) 1 ×

Supports ATX, Micro-ATX and Mini-ITX builds
USB 3.2 Gen 2×2 Type-C front port for fast transfers
34 mm cable-management space keeps wiring tidy
315 mm GPU clearance fits long graphics cards
Two 160 mm PWM front fans pre-installed for airflow

576,99 $

0.00727091 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

What the ProArt PA401 Standard Edition is

The ProArt PA401 Standard Edition is a mid-tower chassis built for ATX, Micro-ATX and Mini-ITX motherboards. It ships with a tempered glass side panel, two 160 mm PWM fans at the front and one 120 mm PWM fan at the rear. The front I/O includes two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2×2 Type-C port and a combined headphone and microphone jack. An integrated hub can control up to five PWM fans.

What to verify on your current build before ordering

Check that your graphics card does not exceed 315 mm in length and that your CPU cooler is no taller than 160 mm. The power supply bay accepts units up to 170 mm long. Only two vertical expansion slots are available, so multi-slot add-in cards beyond the primary GPU cannot be fitted. Drive bays are configurable as one 3.5-inch plus three 2.5-inch, three 3.5-inch, two 3.5-inch plus two 2.5-inch, or four 2.5-inch positions.

What the bundled accessories change for daily use

The pre-installed 160 mm front fans and 120 mm rear fan deliver airflow out of the box, while the PWM hub lets you add up to three more fans without extra controllers. A one-touch latch opens the glass side panel for quick internal access, and a pet-proof power-off lock prevents accidental shutdowns. Removable dust filters on the front and bottom simplify cleaning, and 34 mm of cable-routing space behind the motherboard tray keeps wiring tidy.

Βασικά χαρακτηριστικά

Supports ATX, Micro-ATX and Mini-ITX builds
USB 3.2 Gen 2×2 Type-C front port for fast transfers
34 mm cable-management space keeps wiring tidy
315 mm GPU clearance fits long graphics cards
Two 160 mm PWM front fans pre-installed for airflow

Προδιαγραφές

Motherboard Compatibility	ATX Micro-ATX Mini-ITX
Color	Black
Case Material	Steel, ABS plastic, tempered glass (tempered glass version only)
With Power Supply	No
Front Ports	2 × USB 3.2 Gen 1 (Type-A) 1 × USB 3.2 Gen 2×2 (Type-C) 1 × Headphone + Microphone

Ερωτήσεις για αυτό το προϊόν

What comes in the box with the ProArt PA401 Standard Edition and what must I buy separately?

The case includes two pre-installed 160 mm PWM fans at the front and one 120 mm PWM fan at the rear. You must purchase the power supply, motherboard, CPU cooler, storage drives and GPU separately.

Which drive-bay layout should I choose for the ProArt PA401 Standard Edition?

The chassis supports four configurations: one 3.5-inch plus three 2.5-inch drives, three 3.5-inch drives, two 3.5-inch plus two 2.5-inch drives, or four 2.5-inch drives. Pick the layout that matches your drive count and form factor.

What does the 315 mm maximum GPU length mean for my graphics card choice?

Any graphics card up to 315 mm long will fit. Measure your card before buying; longer models will not install in this case.

Επίσης σε αυτό το ράφι