Micron Technology, Inc.
Micron Technology, Inc. 2GB DDR3 1600 ECC NON-REG 1RX8 1.35V desktop RAM
- 2GB
- DDR3 1600 (PC3 1280…
18,99 $US
0.00024143BTC
En stock
ASUS
ASUS ProArt PA401 Standard Edition PC case
Mid-tower chassis for ATX, Micro-ATX and Mini-ITX boards with a 160 mm front fan and 34 mm cable-routing space
- Motherboard CompatibilityATX Micro-ATX Mini-ITX
- ColorBlack
- Case MaterialSteel, ABS plastic, tempered glass (tempered glass version o
- With Power SupplyNo
- Front Ports2 × USB 3.2 Gen 1 (Type-A) 1 × USB 3.2 Gen 2×2 (Type-C) 1 ×
- Supports ATX, Micro-ATX and Mini-ITX builds
- USB 3.2 Gen 2×2 Type-C front port for fast transfers
- 34 mm cable-management space keeps wiring tidy
- 315 mm GPU clearance fits long graphics cards
- Two 160 mm PWM front fans pre-installed for airflow
What the ProArt PA401 Standard Edition is
The ProArt PA401 Standard Edition is a mid-tower chassis built for ATX, Micro-ATX and Mini-ITX motherboards. It ships with a tempered glass side panel, two 160 mm PWM fans at the front and one 120 mm PWM fan at the rear. The front I/O includes two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2×2 Type-C port and a combined headphone and microphone jack. An integrated hub can control up to five PWM fans.
What to verify on your current build before ordering
Check that your graphics card does not exceed 315 mm in length and that your CPU cooler is no taller than 160 mm. The power supply bay accepts units up to 170 mm long. Only two vertical expansion slots are available, so multi-slot add-in cards beyond the primary GPU cannot be fitted. Drive bays are configurable as one 3.5-inch plus three 2.5-inch, three 3.5-inch, two 3.5-inch plus two 2.5-inch, or four 2.5-inch positions.
What the bundled accessories change for daily use
The pre-installed 160 mm front fans and 120 mm rear fan deliver airflow out of the box, while the PWM hub lets you add up to three more fans without extra controllers. A one-touch latch opens the glass side panel for quick internal access, and a pet-proof power-off lock prevents accidental shutdowns. Removable dust filters on the front and bottom simplify cleaning, and 34 mm of cable-routing space behind the motherboard tray keeps wiring tidy.
Points forts
- Supports ATX, Micro-ATX and Mini-ITX builds
- USB 3.2 Gen 2×2 Type-C front port for fast transfers
- 34 mm cable-management space keeps wiring tidy
- 315 mm GPU clearance fits long graphics cards
- Two 160 mm PWM front fans pre-installed for airflow
Caractéristiques
| Motherboard Compatibility | ATX Micro-ATX Mini-ITX |
|---|---|
| Color | Black |
| Case Material | Steel, ABS plastic, tempered glass (tempered glass version only) |
| With Power Supply | No |
| Front Ports | 2 × USB 3.2 Gen 1 (Type-A) 1 × USB 3.2 Gen 2×2 (Type-C) 1 × Headphone + Microphone |
Questions sur cet article
What comes in the box with the ProArt PA401 Standard Edition and what must I buy separately?
The case includes two pre-installed 160 mm PWM fans at the front and one 120 mm PWM fan at the rear. You must purchase the power supply, motherboard, CPU cooler, storage drives and GPU separately.
Which drive-bay layout should I choose for the ProArt PA401 Standard Edition?
The chassis supports four configurations: one 3.5-inch plus three 2.5-inch drives, three 3.5-inch drives, two 3.5-inch plus two 2.5-inch drives, or four 2.5-inch drives. Pick the layout that matches your drive count and form factor.
What does the 315 mm maximum GPU length mean for my graphics card choice?
Any graphics card up to 315 mm long will fit. Measure your card before buying; longer models will not install in this case.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
AZZA
AZZA CSAZ-810 Sanctum ATX Full Tower PC Case
- ATX Full Tower
- Black / Silver
279,99 $US
0.00355968BTC
En stock