Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Silver rectangular Flex ATX server PSU with fan grille and cable bundle

Athena Power

Athena Power AP-MFATX70P868 Flex ATX 700W server power supply

SKU CH-V63T-2WT1C

Flex ATX 700 W unit with active PFC and 80 Plus Bronze efficiency for compact servers

  • TypeATX
  • Single/RedundantSingle
  • Maximum Power700W
  • Main Connector20+4Pin
  • Output Current+3.3V@18A, +5V@20A,12V1/V2@28/28A, [email protected] , [emai
  • Output+3.3V, +5V,12V1/V2, -12V, +5Vsb
  • 700 W output powers compact servers and workstations
  • 80Plus Bronze efficiency reduces heat and running costs
  • Flex ATX 150 × 81.5 × 40.5 mm form factor fits 1 U and mini-ITX builds
  • Active PFC with 90–264 V input supports worldwide mains without switching
  • IEC/UL/CSA/EN 62368-1 certification confirms safety compliance for US, Canada and Europe

Flex ATX 700W server power supply

The Athena Power AP-MFATX70P868 is a Flex ATX form-factor unit rated at 700W for small-form-factor servers and high-performance IPC systems. It delivers +3.3V@18A, +5V@20A and dual 12V rails at 28A each, with a 90-264V full-range input and active PFC meeting EN61000-3-2. The design complies with FLEX ATX-12V and EPS-12V standards and carries IEC/UL/CSA/EN 62368-1 safety certification.

Build quality and daily connectivity

The chassis measures 150 x 81.50 x 40.5 mm and weighs 3.75 lbs, with an exhaust 12V DC fan governed by a thermal speed controller. Protections include OCP and OVP, while hold-up time is rated at 11 ms minimum at nominal input. A remote on/off function is provided, and every unit undergoes 100% hi-pot, ATE and burn-in testing. MTBF is specified as 250,000 hours at maximum load and +25°C.

Bundled cables and their impact

The cable set includes one 24(20+4) pin ATX connector, one EPS 8-pin and one 8(4+4) pin CPU connector, two PCIe 6+2 pin connectors, three SATA 15-pin power leads, two Molex 4-pin and one floppy 4-pin connector. This complement supports a single graphics card, multiple drives and legacy peripherals without adapters, simplifying cable routing in compact 1U or mini-ITX builds.

Βασικά χαρακτηριστικά

  • 700 W output powers compact servers and workstations
  • 80Plus Bronze efficiency reduces heat and running costs
  • Flex ATX 150 × 81.5 × 40.5 mm form factor fits 1 U and mini-ITX builds
  • Active PFC with 90–264 V input supports worldwide mains without switching
  • IEC/UL/CSA/EN 62368-1 certification confirms safety compliance for US, Canada and Europe

Προδιαγραφές

BrandAthena Power
ModelAP-MFATX70P868
TypeATX
Single/RedundantSingle
Maximum Power700W
Main Connector20+4Pin
Output Current+3.3V@18A, +5V@20A,12V1/V2@28/28A, [email protected] , [email protected]
Output+3.3V, +5V,12V1/V2, -12V, +5Vsb
Input Voltage90 - 264 V
Input Frequency Range47 - 63 Hz
Input Current9.0A@110V, 4.5A@ 240V
MTBF250,000 Hours on Maximum Load at +25 degree C
Efficiency> 80%
Hold-up Time11 ms Minimum at Nominal Input Voltage
ProtectionOCP, OVP,
FeaturesRise time: Less than 70 ms
Dimensions(L x W x H) 150 x 81.50 x 40.5 mm/ 6 x 3.2 x 1.59 in
Weight3.75 lbs
Humidity20%-90%
TemperatureOperating: 0°C ~ +55°C on Full Load; Storage & Shipping: -40°C ~ +70°C

Ερωτήσεις για αυτό το προϊόν

What mains voltage and frequency range does the 90–264 V input with 47–63 Hz cover in practice?

The unit accepts 90–264 V AC across 47–63 Hz, drawing 9.0 A at 110 V or 4.5 A at 240 V, so it works on most global grids without a voltage switch.

Will the 150 × 81.5 × 40.5 mm Flex ATX chassis fit my 1U or mini-ITX case?

At 150 mm long, 81.5 mm wide and 40.5 mm high it matches the Flex ATX form factor used in 1U IPC servers and mini-ITX builds; verify your case clearance against those dimensions.

How do I wire the 20+4-pin ATX, dual EPS 8-pin and two PCIe 6+2-pin connectors without missing the remote on/off signal?

Plug the 24-pin ATX, one 8-pin and one 4+4-pin EPS, both PCIe 6+2-pin cables, then connect the remote on/off header to the motherboard so the PSU starts when the system signals it.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.