Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Tall 9-tier carbon steel filament rack holds 54 spools

BFKK

BFKK 9-Tier Modular Filament Storage Rack 54 Spools 3D Printers Accessory

SKU CH-GMKP-65Q6J

Holds 54 spools across nine 30 lb tiers with tool-free modular assembly and wall-mount stability kit included

  • Holds 54 spools across 9 tiers for high-volume storage
  • Each tier supports 30 lbs with carbon-steel tubes and ribbed joints
  • Adhesive mounts and anti-tip straps prevent tipping without wall damage
  • Slim vertical profile fits desksides and corners while maximizing capacity
  • Tool-free modular design assembles in minutes and adapts to any layout

Nine-Tier Filament Rack for High-Volume Printing

This nine-tier modular rack holds up to 54 spools of 1 kg filament, with each tier accommodating 56 spools. It accepts 200 g, 300 g, 500 g and 1 kg spool sizes, covering PLA, PETG, ABS, TPU and Nylon materials. The tall, slim profile minimises floor footprint while delivering vertical storage capacity for busy print farms or workshops.

Suited for Multi-Material Print Farms.

The 30 lb per tier load rating and included stability kit serve users who run multiple printers simultaneously and need dozens of spools on hand. Buyers storing only a handful of reels or needing portable storage will find the rack oversized for their workspace. It is built for stationary, high-throughput environments rather than occasional desktop use.

Tool-Free Build With Wall Anchors for Stability

Assembly uses a modular, tool-free design that follows the included instructions and finishes in minutes. The stability enhancement kit supplies damage-free adhesive mounts and anti-tip straps that must be secured to a wall to prevent tipping under full load. Skipping the wall anchors is the common error that leaves the tall structure unstable when fully populated.

Βασικά χαρακτηριστικά

  • Holds 54 spools across 9 tiers for high-volume storage
  • Each tier supports 30 lbs with carbon-steel tubes and ribbed joints
  • Adhesive mounts and anti-tip straps prevent tipping without wall damage
  • Slim vertical profile fits desksides and corners while maximizing capacity
  • Tool-free modular design assembles in minutes and adapts to any layout

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

What do I need to already have so the 54-spool capacity is actually usable?

You need 1 kg spools that fit the 56-spool-per-tier layout; the rack itself includes the carbon-steel tubes and ribbed plastic joints, so no extra rods or brackets are required.

Will the 30 lb per tier rating hold if I keep my older 200 g and 300 g spools on the same rack?

Yes — the rack is tested at 30 lbs per tier and the supplier lists compatibility with 200 g, 300 g, 500 g and 1 kg spools, so mixed weights are supported within that limit.

How can I verify the rack is stable after I assemble it tool-free?

Attach the included adhesive wall mounts and anti-tip straps, then confirm each tier sits level and shows no bowing when loaded up to the 30 lb rating.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.