暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Tall 9-tier carbon steel filament rack holds 54 spools

BFKK

BFKK 9-Tier Modular Filament Storage Rack 54 Spools 3D Printers Accessory

SKU CH-GMKP-65Q6J

Holds 54 spools across nine 30 lb tiers with tool-free modular assembly and wall-mount stability kit included

  • Holds 54 spools across 9 tiers for high-volume storage
  • Each tier supports 30 lbs with carbon-steel tubes and ribbed joints
  • Adhesive mounts and anti-tip straps prevent tipping without wall damage
  • Slim vertical profile fits desksides and corners while maximizing capacity
  • Tool-free modular design assembles in minutes and adapts to any layout

Nine-Tier Filament Rack for High-Volume Printing

This nine-tier modular rack holds up to 54 spools of 1 kg filament, with each tier accommodating 56 spools. It accepts 200 g, 300 g, 500 g and 1 kg spool sizes, covering PLA, PETG, ABS, TPU and Nylon materials. The tall, slim profile minimises floor footprint while delivering vertical storage capacity for busy print farms or workshops.

Suited for Multi-Material Print Farms.

The 30 lb per tier load rating and included stability kit serve users who run multiple printers simultaneously and need dozens of spools on hand. Buyers storing only a handful of reels or needing portable storage will find the rack oversized for their workspace. It is built for stationary, high-throughput environments rather than occasional desktop use.

Tool-Free Build With Wall Anchors for Stability

Assembly uses a modular, tool-free design that follows the included instructions and finishes in minutes. The stability enhancement kit supplies damage-free adhesive mounts and anti-tip straps that must be secured to a wall to prevent tipping under full load. Skipping the wall anchors is the common error that leaves the tall structure unstable when fully populated.

特長

  • Holds 54 spools across 9 tiers for high-volume storage
  • Each tier supports 30 lbs with carbon-steel tubes and ribbed joints
  • Adhesive mounts and anti-tip straps prevent tipping without wall damage
  • Slim vertical profile fits desksides and corners while maximizing capacity
  • Tool-free modular design assembles in minutes and adapts to any layout

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What do I need to already have so the 54-spool capacity is actually usable?

You need 1 kg spools that fit the 56-spool-per-tier layout; the rack itself includes the carbon-steel tubes and ribbed plastic joints, so no extra rods or brackets are required.

Will the 30 lb per tier rating hold if I keep my older 200 g and 300 g spools on the same rack?

Yes — the rack is tested at 30 lbs per tier and the supplier lists compatibility with 200 g, 300 g, 500 g and 1 kg spools, so mixed weights are supported within that limit.

How can I verify the rack is stable after I assemble it tool-free?

Attach the included adhesive wall mounts and anti-tip straps, then confirm each tier sits level and shows no bowing when loaded up to the 30 lb rating.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。