暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Lavender PLA filament spool in vacuum-sealed packaging

Ziro 3D

Ziro 3D PLA Pro Filament 1.75mm 1kg Lavender 3d printers accessory

SKU CH-PJP9-W055Q

PLA filament with ±0.03 mm tolerance, 1.75 mm diameter and 1 kg spool for smooth, low-shrinkage prints

  • ColorLavender
  • TypeFilament
  • Precise layers from strict ±0.03 mm tolerance
  • Dry filament ready to print thanks to vacuum-sealed spool
  • Smooth flow with low shrinkage and strong layer adhesion
  • 37 colours available so projects never lack choice
  • Biodegradable PLA prints odour-free without a heated bed

Lavender PLA Pro Filament 1.75 mm

Ziro 3D supplies this PLA Pro filament on a 1 kg spool with a lavender colour and a 1.75 mm diameter. The material is manufactured to a ±0.03 mm tolerance and wound to be 100 % tangle-free. It is aimed at hobbyists and makers who use FDM printers compatible with 1.75 mm filament.

Vacuum-sealed spool and print settings

Each spool arrives vacuum-sealed to keep the filament dry until use. The maker highlights note a print temperature range of 190–220 °C, a suggested bed temperature of 50–60 °C (optional) and a print speed window of 30–90 mm/s. These figures help users dial in smooth extrusion and strong layer adhesion without a heated bed requirement.

Suits general FDM printing, not specialised needs

This filament suits owners of Creality, Anycubic, Bambu and other 1.75 mm FDM printers who want a biodegradable PLA with low shrinkage and no odour. It is less suited for builders who need engineering-grade strength, high-temperature resistance or exotic composite properties for functional parts.

特長

  • Precise layers from strict ±0.03 mm tolerance
  • Dry filament ready to print thanks to vacuum-sealed spool
  • Smooth flow with low shrinkage and strong layer adhesion
  • 37 colours available so projects never lack choice
  • Biodegradable PLA prints odour-free without a heated bed

仕様

ColorLavender
TypeFilament

この商品に関する質問

How often will the 1.75 mm filament need replacing on a 1 kg spool?

The spool holds 330 m of filament; replacement frequency depends on your print volume and model size.

What tolerance limit affects dimensional consistency during long prints?

Manufacturing tolerance is ±0.03 mm, keeping line width stable layer after layer.

How much heat does the nozzle need for all-day printing with this PLA?

Recommended nozzle temperature is 190-220 °C; bed temperature 50-60 °C is optional.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。