Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Lavender PLA filament spool in vacuum-sealed packaging

Ziro 3D

Ziro 3D PLA Pro Filament 1.75mm 1kg Lavender 3d printers accessory

SKU CH-PJP9-W055Q

PLA filament with ±0.03 mm tolerance, 1.75 mm diameter and 1 kg spool for smooth, low-shrinkage prints

  • ColorLavender
  • TypeFilament
  • Precise layers from strict ±0.03 mm tolerance
  • Dry filament ready to print thanks to vacuum-sealed spool
  • Smooth flow with low shrinkage and strong layer adhesion
  • 37 colours available so projects never lack choice
  • Biodegradable PLA prints odour-free without a heated bed

Lavender PLA Pro Filament 1.75 mm

Ziro 3D supplies this PLA Pro filament on a 1 kg spool with a lavender colour and a 1.75 mm diameter. The material is manufactured to a ±0.03 mm tolerance and wound to be 100 % tangle-free. It is aimed at hobbyists and makers who use FDM printers compatible with 1.75 mm filament.

Vacuum-sealed spool and print settings

Each spool arrives vacuum-sealed to keep the filament dry until use. The maker highlights note a print temperature range of 190–220 °C, a suggested bed temperature of 50–60 °C (optional) and a print speed window of 30–90 mm/s. These figures help users dial in smooth extrusion and strong layer adhesion without a heated bed requirement.

Suits general FDM printing, not specialised needs

This filament suits owners of Creality, Anycubic, Bambu and other 1.75 mm FDM printers who want a biodegradable PLA with low shrinkage and no odour. It is less suited for builders who need engineering-grade strength, high-temperature resistance or exotic composite properties for functional parts.

Privalumai

  • Precise layers from strict ±0.03 mm tolerance
  • Dry filament ready to print thanks to vacuum-sealed spool
  • Smooth flow with low shrinkage and strong layer adhesion
  • 37 colours available so projects never lack choice
  • Biodegradable PLA prints odour-free without a heated bed

Specifikacijos

ColorLavender
TypeFilament

Klausimai apie šią prekę

How often will the 1.75 mm filament need replacing on a 1 kg spool?

The spool holds 330 m of filament; replacement frequency depends on your print volume and model size.

What tolerance limit affects dimensional consistency during long prints?

Manufacturing tolerance is ±0.03 mm, keeping line width stable layer after layer.

How much heat does the nozzle need for all-day printing with this PLA?

Recommended nozzle temperature is 190-220 °C; bed temperature 50-60 °C is optional.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.