Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Lavender PLA filament spool in vacuum-sealed packaging

Ziro 3D

Ziro 3D PLA Pro Filament 1.75mm 1kg Lavender 3d printers accessory

SKU CH-PJP9-W055Q

PLA filament with ±0.03 mm tolerance, 1.75 mm diameter and 1 kg spool for smooth, low-shrinkage prints

  • ColorLavender
  • TypeFilament
  • Precise layers from strict ±0.03 mm tolerance
  • Dry filament ready to print thanks to vacuum-sealed spool
  • Smooth flow with low shrinkage and strong layer adhesion
  • 37 colours available so projects never lack choice
  • Biodegradable PLA prints odour-free without a heated bed

Lavender PLA Pro Filament 1.75 mm

Ziro 3D supplies this PLA Pro filament on a 1 kg spool with a lavender colour and a 1.75 mm diameter. The material is manufactured to a ±0.03 mm tolerance and wound to be 100 % tangle-free. It is aimed at hobbyists and makers who use FDM printers compatible with 1.75 mm filament.

Vacuum-sealed spool and print settings

Each spool arrives vacuum-sealed to keep the filament dry until use. The maker highlights note a print temperature range of 190–220 °C, a suggested bed temperature of 50–60 °C (optional) and a print speed window of 30–90 mm/s. These figures help users dial in smooth extrusion and strong layer adhesion without a heated bed requirement.

Suits general FDM printing, not specialised needs

This filament suits owners of Creality, Anycubic, Bambu and other 1.75 mm FDM printers who want a biodegradable PLA with low shrinkage and no odour. It is less suited for builders who need engineering-grade strength, high-temperature resistance or exotic composite properties for functional parts.

Priekšrocības

  • Precise layers from strict ±0.03 mm tolerance
  • Dry filament ready to print thanks to vacuum-sealed spool
  • Smooth flow with low shrinkage and strong layer adhesion
  • 37 colours available so projects never lack choice
  • Biodegradable PLA prints odour-free without a heated bed

Specifikācijas

ColorLavender
TypeFilament

Jautājumi par šo preci

How often will the 1.75 mm filament need replacing on a 1 kg spool?

The spool holds 330 m of filament; replacement frequency depends on your print volume and model size.

What tolerance limit affects dimensional consistency during long prints?

Manufacturing tolerance is ±0.03 mm, keeping line width stable layer after layer.

How much heat does the nozzle need for all-day printing with this PLA?

Recommended nozzle temperature is 190-220 °C; bed temperature 50-60 °C is optional.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.