Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Lavender PLA filament spool in vacuum-sealed packaging

Ziro 3D

Ziro 3D PLA Pro Filament 1.75mm 1kg Lavender 3d printers accessory

SKU CH-PJP9-W055Q

PLA filament with ±0.03 mm tolerance, 1.75 mm diameter and 1 kg spool for smooth, low-shrinkage prints

  • ColorLavender
  • TypeFilament
  • Precise layers from strict ±0.03 mm tolerance
  • Dry filament ready to print thanks to vacuum-sealed spool
  • Smooth flow with low shrinkage and strong layer adhesion
  • 37 colours available so projects never lack choice
  • Biodegradable PLA prints odour-free without a heated bed

Lavender PLA Pro Filament 1.75 mm

Ziro 3D supplies this PLA Pro filament on a 1 kg spool with a lavender colour and a 1.75 mm diameter. The material is manufactured to a ±0.03 mm tolerance and wound to be 100 % tangle-free. It is aimed at hobbyists and makers who use FDM printers compatible with 1.75 mm filament.

Vacuum-sealed spool and print settings

Each spool arrives vacuum-sealed to keep the filament dry until use. The maker highlights note a print temperature range of 190–220 °C, a suggested bed temperature of 50–60 °C (optional) and a print speed window of 30–90 mm/s. These figures help users dial in smooth extrusion and strong layer adhesion without a heated bed requirement.

Suits general FDM printing, not specialised needs

This filament suits owners of Creality, Anycubic, Bambu and other 1.75 mm FDM printers who want a biodegradable PLA with low shrinkage and no odour. It is less suited for builders who need engineering-grade strength, high-temperature resistance or exotic composite properties for functional parts.

Pluspunten

  • Precise layers from strict ±0.03 mm tolerance
  • Dry filament ready to print thanks to vacuum-sealed spool
  • Smooth flow with low shrinkage and strong layer adhesion
  • 37 colours available so projects never lack choice
  • Biodegradable PLA prints odour-free without a heated bed

Specificaties

ColorLavender
TypeFilament

Vragen over dit artikel

How often will the 1.75 mm filament need replacing on a 1 kg spool?

The spool holds 330 m of filament; replacement frequency depends on your print volume and model size.

What tolerance limit affects dimensional consistency during long prints?

Manufacturing tolerance is ±0.03 mm, keeping line width stable layer after layer.

How much heat does the nozzle need for all-day printing with this PLA?

Recommended nozzle temperature is 190-220 °C; bed temperature 50-60 °C is optional.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.