BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277636BTC
Διαθέσιμο
Cable Leader
Cable Leader PW126-1206 6 ft 14 AWG 15A 125V Power Cord NEMA 5-15P to C15
Six-foot 14 AWG cord rated 15A at 125V with NEMA 5-15P plug and C15 connector for servers and PDUs
- Delivers up to 15A for servers and PDUs with 14 AWG copper conductors
- Withstands 105°C operating temperatures thanks to SJT jacket rated 300V
- UL Listed and CSA certified (file E210037) for verified safety compliance
- True 3-wire grounded design protects equipment from electrical faults
- 6 ft length connects NEMA 5-15P outlet to IEC C15 device inlet
Cable Leader 6 ft 14 AWG Power Cord
The Cable Leader PW126-1206 is a 6 ft power cord with a NEMA 5-15P plug and an IEC320 C15 connector. It connects computers, monitors or servers to a wall outlet, power strip or PDU. The cord is built with 14 AWG copper conductors rated for 15A at 125V.
Straightforward installation
Plug the 5-15P end into the outlet and the C15 end into the equipment inlet. The fully moulded, grounded 3-wire design ensures a secure fit. Issues arise only if the device requires a C13 inlet instead of C15, or if the draw exceeds the 15A rating of the cord.
14 AWG gauge handles up to 15A loads
The heavy-duty 14 AWG construction supports servers, PDUs and higher-draw equipment up to 15A at 125V. The SJT jacket is rated for 105C and 300V. It is not suited for 20A circuits that require 12 AWG cable, nor for devices needing a C13 connector.
Βασικά χαρακτηριστικά
- Delivers up to 15A for servers and PDUs with 14 AWG copper conductors
- Withstands 105°C operating temperatures thanks to SJT jacket rated 300V
- UL Listed and CSA certified (file E210037) for verified safety compliance
- True 3-wire grounded design protects equipment from electrical faults
- 6 ft length connects NEMA 5-15P outlet to IEC C15 device inlet
Προδιαγραφές
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Ερωτήσεις για αυτό το προϊόν
How can I verify the cord is delivering full 15 A / 125 V after I plug it in?
Check that the NEMA 5-15P plug seats firmly in the outlet and the C15 connector locks into the device inlet; the moulded strain reliefs should sit flush with no visible gap.
What comes in the box and is anything else required to use it?
The package contains the 6 ft 14 AWG cord with moulded 5-15P and C15 ends; no extra adapters or tools are needed for a standard North American outlet.
When should I choose this 14 AWG version instead of the 16 AWG or 12 AWG options?
Select the 14 AWG model for equipment drawing up to 15 A such as servers or PDUs; use 16 AWG for loads up to 13 A and 12 AWG for 20 A circuits.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
