Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 6 ft power cord with NEMA 5-15P plug to C15 connector, 14 AWG SJT jacket

Cable Leader

Cable Leader PW126-1206 6 ft 14 AWG 15A 125V Power Cord NEMA 5-15P to C15

SKU CH-85B0-ECX2K

Six-foot 14 AWG cord rated 15A at 125V with NEMA 5-15P plug and C15 connector for servers and PDUs

  • Delivers up to 15A for servers and PDUs with 14 AWG copper conductors
  • Withstands 105°C operating temperatures thanks to SJT jacket rated 300V
  • UL Listed and CSA certified (file E210037) for verified safety compliance
  • True 3-wire grounded design protects equipment from electrical faults
  • 6 ft length connects NEMA 5-15P outlet to IEC C15 device inlet

Cable Leader 6 ft 14 AWG Power Cord

The Cable Leader PW126-1206 is a 6 ft power cord with a NEMA 5-15P plug and an IEC320 C15 connector. It connects computers, monitors or servers to a wall outlet, power strip or PDU. The cord is built with 14 AWG copper conductors rated for 15A at 125V.

Straightforward installation

Plug the 5-15P end into the outlet and the C15 end into the equipment inlet. The fully moulded, grounded 3-wire design ensures a secure fit. Issues arise only if the device requires a C13 inlet instead of C15, or if the draw exceeds the 15A rating of the cord.

14 AWG gauge handles up to 15A loads

The heavy-duty 14 AWG construction supports servers, PDUs and higher-draw equipment up to 15A at 125V. The SJT jacket is rated for 105C and 300V. It is not suited for 20A circuits that require 12 AWG cable, nor for devices needing a C13 connector.

Privalumai

  • Delivers up to 15A for servers and PDUs with 14 AWG copper conductors
  • Withstands 105°C operating temperatures thanks to SJT jacket rated 300V
  • UL Listed and CSA certified (file E210037) for verified safety compliance
  • True 3-wire grounded design protects equipment from electrical faults
  • 6 ft length connects NEMA 5-15P outlet to IEC C15 device inlet

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How can I verify the cord is delivering full 15 A / 125 V after I plug it in?

Check that the NEMA 5-15P plug seats firmly in the outlet and the C15 connector locks into the device inlet; the moulded strain reliefs should sit flush with no visible gap.

What comes in the box and is anything else required to use it?

The package contains the 6 ft 14 AWG cord with moulded 5-15P and C15 ends; no extra adapters or tools are needed for a standard North American outlet.

When should I choose this 14 AWG version instead of the 16 AWG or 12 AWG options?

Select the 14 AWG model for equipment drawing up to 15 A such as servers or PDUs; use 16 AWG for loads up to 13 A and 12 AWG for 20 A circuits.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.