Corn Electronics
Corn Electronics ARCTIC MX-6 4 g thermal paste
High-performance thermal compound with 20% better conductivity than MX-4, non-conductive and safe for direct-die GPU and console applications
- 20 % lower thermal resistance than MX-4 for cooler CPU and GPU operation
- Non-conductive and non-capacitive formula prevents short circuits on sensitive components
- Viscosity tuned for direct-die GPU and console processor applications
- Easy-to-use consistency simplifies installation on CPUs, graphics cards and laptops
- Backed by over 20 years of PC cooling experience for reliable performance
ARCTIC MX-6 4 g thermal paste
The ARCTIC MX-6 is a high-performance thermal compound designed for CPUs, graphics cards, consoles and laptops. Its non-conductive and non-capacitive formula eliminates the risk of electrical shorts during application. The paste offers a consistency suited for both standard and direct-die cooling scenarios. It targets builders and technicians seeking reliable heat transfer without electrical hazards.
20 % lower thermal resistance than MX-4
The defining specification is a measurably lower thermal resistance, delivering 20 % better performance compared to the previous MX-4 formulation. This improvement stems from an updated composition developed over two decades of cooling expertise. Lower resistance means more efficient heat flow from the die to the cooler. Buyers needing a paste with documented gains over the MX-4 will find this metric decisive.
4 g syringe covers multiple applications
The 4 g volume provides enough compound for several CPU or GPU installations, including direct-die GPU and console processor work. Viscosity allows controlled spreading without excessive run-off on bare dies. It runs out when handling large-scale server deployments or frequent re-pasting workshops. Users planning many builds should consider larger containers.
Βασικά χαρακτηριστικά
- 20 % lower thermal resistance than MX-4 for cooler CPU and GPU operation
- Non-conductive and non-capacitive formula prevents short circuits on sensitive components
- Viscosity tuned for direct-die GPU and console processor applications
- Easy-to-use consistency simplifies installation on CPUs, graphics cards and laptops
- Backed by over 20 years of PC cooling experience for reliable performance
Προδιαγραφές
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Άλλες εκδόσεις αυτού του μοντέλου
2 ακόμη στην ίδια σειρά
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
Ερωτήσεις για αυτό το προϊόν
How much better is the thermal resistance compared to the MX-4 once the MX-6 is applied in a system?
The MX-6 achieves a measurably lower thermal resistance, delivering 20% better performance than the MX-4 when installed between a CPU or GPU and its cooler.
Is the MX-6 electrically conductive or capacitive, and what does that mean for installation safety?
The paste is neither electrically conductive nor capacitive, so accidental contact with surrounding components will not cause short circuits or discharges.
What viscosity does the MX-6 have and can it be used for direct-die GPU or console applications?
Its viscosity makes it suitable for direct-die cooling scenarios on graphics card GPUs and console processors as well as standard CPU installations.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.00051461BTC
Διαθέσιμο