Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
White 4 g syringe of grey thermal compound with black cap

Corn Electronics

Corn Electronics ARCTIC MX-6 4 g thermal paste

SKU CH-0VYY-RXXN6

High-performance thermal compound with 20% better conductivity than MX-4, non-conductive and safe for direct-die GPU and console applications

Weight 4g

  • 20 % lower thermal resistance than MX-4 for cooler CPU and GPU operation
  • Non-conductive and non-capacitive formula prevents short circuits on sensitive components
  • Viscosity tuned for direct-die GPU and console processor applications
  • Easy-to-use consistency simplifies installation on CPUs, graphics cards and laptops
  • Backed by over 20 years of PC cooling experience for reliable performance

ARCTIC MX-6 4 g thermal paste

The ARCTIC MX-6 is a high-performance thermal compound designed for CPUs, graphics cards, consoles and laptops. Its non-conductive and non-capacitive formula eliminates the risk of electrical shorts during application. The paste offers a consistency suited for both standard and direct-die cooling scenarios. It targets builders and technicians seeking reliable heat transfer without electrical hazards.

20 % lower thermal resistance than MX-4

The defining specification is a measurably lower thermal resistance, delivering 20 % better performance compared to the previous MX-4 formulation. This improvement stems from an updated composition developed over two decades of cooling expertise. Lower resistance means more efficient heat flow from the die to the cooler. Buyers needing a paste with documented gains over the MX-4 will find this metric decisive.

4 g syringe covers multiple applications

The 4 g volume provides enough compound for several CPU or GPU installations, including direct-die GPU and console processor work. Viscosity allows controlled spreading without excessive run-off on bare dies. It runs out when handling large-scale server deployments or frequent re-pasting workshops. Users planning many builds should consider larger containers.

Přednosti

  • 20 % lower thermal resistance than MX-4 for cooler CPU and GPU operation
  • Non-conductive and non-capacitive formula prevents short circuits on sensitive components
  • Viscosity tuned for direct-die GPU and console processor applications
  • Easy-to-use consistency simplifies installation on CPUs, graphics cards and laptops
  • Backed by over 20 years of PC cooling experience for reliable performance

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Další verze tohoto modelu

Dalších 2 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much better is the thermal resistance compared to the MX-4 once the MX-6 is applied in a system?

The MX-6 achieves a measurably lower thermal resistance, delivering 20% better performance than the MX-4 when installed between a CPU or GPU and its cooler.

Is the MX-6 electrically conductive or capacitive, and what does that mean for installation safety?

The paste is neither electrically conductive nor capacitive, so accidental contact with surrounding components will not cause short circuits or discharges.

What viscosity does the MX-6 have and can it be used for direct-die GPU or console applications?

Its viscosity makes it suitable for direct-die cooling scenarios on graphics card GPUs and console processors as well as standard CPU installations.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.