Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Flat beige ribbon cable with connectors at each end, 20cm long

Danmini

Danmini PCI-E 1X Riser Extender Ribbon Cable 20cm

SKU CH-8EET-JWEYX

A flexible 20 cm ribbon cable that relocates a PCI Express 1x card away from the motherboard

  • TypeMini PCI Express to Mini PCI Express
  • Extends a PCIe 1× slot up to 20 cm for flexible card placement
  • High-quality flexible ribbon cable routes around tight chassis spaces
  • No driver installation required for immediate use
  • Direct socket alignment keeps the card electrically in line with the motherboard
  • Not hot-swappable — power down before connecting or disconnecting

PCI-E 1X Riser Cable 20cm

This 20 cm flexible ribbon cable extends a PCI Express 1x slot away from the motherboard. It connects a Mini PCI Express device to a Mini PCI Express slot without any driver installation. The cable is designed for permanent installation and does not support hot-swapping. It suits builders who need to reposition a low-profile add-in card inside a compact chassis.

Verify slot type and clearance before ordering

Confirm that both the motherboard and the add-in card use Mini PCI Express 1x connectors. The 20 cm length limits how far the card can be relocated, so measure the internal routing path inside your case. Ensure the ribbon can bend without sharp kinks and that the target mounting location has enough space for the card and cable combined.

Thin flexible ribbon with direct socket alignment

The high-quality flex ribbon keeps the card socket directly in line with the motherboard socket for a low-profile fit. Its thin construction allows routing behind motherboard trays or along tight channels. The cable carries signal and power for the 1x link without active components, so long-term reliability depends on avoiding repeated flexing or tight bends during assembly and maintenance.

Βασικά χαρακτηριστικά

  • Extends a PCIe 1× slot up to 20 cm for flexible card placement
  • High-quality flexible ribbon cable routes around tight chassis spaces
  • No driver installation required for immediate use
  • Direct socket alignment keeps the card electrically in line with the motherboard
  • Not hot-swappable — power down before connecting or disconnecting

Προδιαγραφές

TypeMini PCI Express to Mini PCI Express

Ερωτήσεις για αυτό το προϊόν

What comes in the box and is anything else needed to use the PCIe 1x riser cable?

The package contains the 20 cm flexible ribbon riser with a PCIe 1x connector at each end; no driver or extra hardware is required for installation.

How do I decide which version or length of this extender to choose?

This model is offered only as a 20 cm PCIe 1x to 1x ribbon cable, so the choice is simply whether that length fits the spacing in your build.

What does the 20 cm length mean once the riser is installed in a real system?

It lets you position a PCIe 1x card up to 20 cm away from the motherboard slot while keeping the electrical connection in line with the original socket.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.