暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Flat beige ribbon cable with connectors at each end, 20cm long

Danmini

Danmini PCI-E 1X Riser Extender Ribbon Cable 20cm

SKU CH-8EET-JWEYX

A flexible 20 cm ribbon cable that relocates a PCI Express 1x card away from the motherboard

  • TypeMini PCI Express to Mini PCI Express
  • Extends a PCIe 1× slot up to 20 cm for flexible card placement
  • High-quality flexible ribbon cable routes around tight chassis spaces
  • No driver installation required for immediate use
  • Direct socket alignment keeps the card electrically in line with the motherboard
  • Not hot-swappable — power down before connecting or disconnecting

PCI-E 1X Riser Cable 20cm

This 20 cm flexible ribbon cable extends a PCI Express 1x slot away from the motherboard. It connects a Mini PCI Express device to a Mini PCI Express slot without any driver installation. The cable is designed for permanent installation and does not support hot-swapping. It suits builders who need to reposition a low-profile add-in card inside a compact chassis.

Verify slot type and clearance before ordering

Confirm that both the motherboard and the add-in card use Mini PCI Express 1x connectors. The 20 cm length limits how far the card can be relocated, so measure the internal routing path inside your case. Ensure the ribbon can bend without sharp kinks and that the target mounting location has enough space for the card and cable combined.

Thin flexible ribbon with direct socket alignment

The high-quality flex ribbon keeps the card socket directly in line with the motherboard socket for a low-profile fit. Its thin construction allows routing behind motherboard trays or along tight channels. The cable carries signal and power for the 1x link without active components, so long-term reliability depends on avoiding repeated flexing or tight bends during assembly and maintenance.

特長

  • Extends a PCIe 1× slot up to 20 cm for flexible card placement
  • High-quality flexible ribbon cable routes around tight chassis spaces
  • No driver installation required for immediate use
  • Direct socket alignment keeps the card electrically in line with the motherboard
  • Not hot-swappable — power down before connecting or disconnecting

仕様

TypeMini PCI Express to Mini PCI Express

この商品に関する質問

What comes in the box and is anything else needed to use the PCIe 1x riser cable?

The package contains the 20 cm flexible ribbon riser with a PCIe 1x connector at each end; no driver or extra hardware is required for installation.

How do I decide which version or length of this extender to choose?

This model is offered only as a 20 cm PCIe 1x to 1x ribbon cable, so the choice is simply whether that length fits the spacing in your build.

What does the 20 cm length mean once the riser is installed in a real system?

It lets you position a PCIe 1x card up to 20 cm away from the motherboard slot while keeping the electrical connection in line with the original socket.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。