DELL
DELL 400-AJUO 1.2TB 2.5" SAS 10000 RPM 12Gb/s internal hard drive
A 1.2 TB 2.5" SAS hard drive spinning at 10000 RPM with a 12 Gb/s interface and hot-swap tray for server storage
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity1.2TB
- RPM10000 RPM
- Average Latency12Gb/s
- Form Factor2.5"
- 2 TB capacity stores large datasets
- 10,000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high throughput
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Dell 1.2TB SAS 10K hot-swap drive
This Dell 400-AJUO is a new 1.2TB internal hard drive with a 2.5 inch form factor. It uses a SAS 12Gb/s interface and spins at 10000 RPM. The unit is supplied as a bare drive with a hot-swap tray. It is built for Dell server and storage arrays that require this specific part number.
Fits 12Gb/s SAS hot-swap bays only
This drive suits administrators replacing a failed Dell 400-AJUO or expanding a compatible 12Gb/s SAS enclosure. Buyers whose backplane or controller lacks SAS 12Gb/s support should look elsewhere. Systems limited to slower SAS speeds or different tray formats cannot use this unit.
12Gb/s SAS interface decides compatibility
The single specification that determines fit is the 12Gb/s SAS interface. The host backplane and controller must support this exact signalling rate and connector type. Without 12Gb/s SAS capability the drive will not function.
Βασικά χαρακτηριστικά
- 2 TB capacity stores large datasets
- 10,000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high throughput
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Προδιαγραφές
| Brand | Dell |
|---|---|
| Model | 400-AJUO |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 2.5" |
Ερωτήσεις για αυτό το προϊόν
Does the 400-AJUO ship with a caddy or screws, or do I need to source a 2.5" SAS tray separately?
The drive is supplied as a bare unit with hot-swap capability; a compatible 2.5" SAS tray or caddy must be purchased separately if your chassis does not already include one.
I see only one capacity listed — is the 1.2 TB version the right choice for a high-IOPS database volume?
At 10 000 RPM with a 12 Gb/s SAS link, the 1.2 TB model delivers the spindle speed and bus bandwidth suited to random-read-heavy database workloads.
What does the 12 Gb/s SAS rating actually deliver inside a PowerEdge server backplane?
The 12 Gb/s interface supports full duplex transfers up to 12 Gb/s per port, so sustained throughput is limited by the 10 000 RPM mechanics rather than the bus.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
