DELL
DELL 400-AJUO 1.2TB 2.5" SAS 10000 RPM 12Gb/s internal hard drive
A 1.2 TB 2.5" SAS hard drive spinning at 10000 RPM with a 12 Gb/s interface and hot-swap tray for server storage
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity1.2TB
- RPM10000 RPM
- Average Latency12Gb/s
- Form Factor2.5"
- 2 TB capacity stores large datasets
- 10,000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high throughput
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Dell 1.2TB SAS 10K hot-swap drive
This Dell 400-AJUO is a new 1.2TB internal hard drive with a 2.5 inch form factor. It uses a SAS 12Gb/s interface and spins at 10000 RPM. The unit is supplied as a bare drive with a hot-swap tray. It is built for Dell server and storage arrays that require this specific part number.
Fits 12Gb/s SAS hot-swap bays only
This drive suits administrators replacing a failed Dell 400-AJUO or expanding a compatible 12Gb/s SAS enclosure. Buyers whose backplane or controller lacks SAS 12Gb/s support should look elsewhere. Systems limited to slower SAS speeds or different tray formats cannot use this unit.
12Gb/s SAS interface decides compatibility
The single specification that determines fit is the 12Gb/s SAS interface. The host backplane and controller must support this exact signalling rate and connector type. Without 12Gb/s SAS capability the drive will not function.
Põhijooned
- 2 TB capacity stores large datasets
- 10,000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high throughput
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Tehnilised andmed
| Brand | Dell |
|---|---|
| Model | 400-AJUO |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 2.5" |
Küsimused selle toote kohta
Does the 400-AJUO ship with a caddy or screws, or do I need to source a 2.5" SAS tray separately?
The drive is supplied as a bare unit with hot-swap capability; a compatible 2.5" SAS tray or caddy must be purchased separately if your chassis does not already include one.
I see only one capacity listed — is the 1.2 TB version the right choice for a high-IOPS database volume?
At 10 000 RPM with a 12 Gb/s SAS link, the 1.2 TB model delivers the spindle speed and bus bandwidth suited to random-read-heavy database workloads.
What does the 12 Gb/s SAS rating actually deliver inside a PowerEdge server backplane?
The 12 Gb/s interface supports full duplex transfers up to 12 Gb/s per port, so sustained throughput is limited by the 10 000 RPM mechanics rather than the bus.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.



