DELL

DELL PowerEdge M630 Blade 2x Xeon E5-2699 v4 2.2 GHz 256GB DDR4 2x 900GB SAS

SKU CH-HFGP-VKNWS

Dual 22-core Xeon blade server with 256 GB DDR4 and 1.8 TB SAS storage in a half-height form factor

TypeBlade
CPU TypeIntel Xeon
CPU Speed2.2 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB

Dual Xeon E5-2699 v4 processors provide 22 cores each at 2.2 GHz
256 GB DDR4 ECC memory supports virtualisation workloads with room to grow to 512 GB
PERC H330 RAID controller manages 2x 900 GB SAS drives for redundant storage
iDRAC8 Enterprise enables remote power, console and firmware updates
Blade form factor fits dense chassis deployments with 10 GbE 562T adapter

1.157,99 $

0.01470856 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Dell PowerEdge M630 blade server

The Dell PowerEdge M630 is a dual-socket blade server built for dense compute environments. It ships with two Intel Xeon E5-2699 v4 processors running at 2.2 GHz and 256 GB of DDR4 memory. The unit includes a PERC H330 SAS storage controller and integrated graphics for management tasks.

Suited for virtualisation hosts

This configuration targets buyers who need high core counts and large memory capacity in a single blade slot. It is not for buyers who want more storage bays than the two 2.5-inch slots provided. It is not for builders who need a second GPU or additional PCIe expansion beyond the blade form factor.

Two 900 GB SAS hard drives installed

The server arrives with two 900 GB SAS drives spinning at 10K RPM. The PERC H330 controller manages these drives in RAID 0, RAID 1 or JBOD. Maximum supported memory is 512 GB across the available DIMM slots.

Βασικά χαρακτηριστικά

Dual Xeon E5-2699 v4 processors provide 22 cores each at 2.2 GHz
256 GB DDR4 ECC memory supports virtualisation workloads with room to grow to 512 GB
PERC H330 RAID controller manages 2x 900 GB SAS drives for redundant storage
iDRAC8 Enterprise enables remote power, console and firmware updates
Blade form factor fits dense chassis deployments with 10 GbE 562T adapter

Προδιαγραφές

Brand	DELL
Series	PowerEdge
Model	Blade
Type	Blade
CPU Type	Intel Xeon
CPU Speed	2.2 GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	256GB
Memory Type	DDR4 SDRAM
Max Memory Capacity	512GB
Hard Drive (Installed)	1.800,00
Storage Controller	Dell PERC H330 SAS Storage Controller
HDD Interface	SAS
GPU Type	Integrated Graphics
Remote Management	iDRAC8 Enterprise
Dimensions	22 x 22x 10 in
Weight	20

Ερωτήσεις για αυτό το προϊόν

How is the M630 blade installed in a PowerEdge chassis and what step is often missed?

Slide the blade into an empty bay until the latch clicks, then use iDRAC8 Enterprise to verify the blade is powered and recognised by the chassis management module — skipping the iDRAC check leaves the blade invisible to the system.

Which components in this M630 will need replacement first during its service life?

The two 900 GB SAS 2.5-inch 10K hard drives and the PERC H330 RAID controller battery are the only field-replaceable parts with a predictable wear-out timeline.

What thermal or power limit appears first when both Xeon E5-2699 v4 CPUs run at 2.2 GHz continuously?

The chassis power budget and shared cooling capacity for the half-height blade form factor throttle the dual 22-core processors before either CPU hits its own thermal ceiling.

Επίσης σε αυτό το ράφι