Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Dell PowerEdge M630 blade server, silver metal chassis

DELL

DELL PowerEdge M630 Blade 2x Xeon E5-2699 v4 2.2 GHz 256GB DDR4 2x 900GB SAS

SKU CH-HFGP-VKNWS

Dual 22-core Xeon blade server with 256 GB DDR4 and 1.8 TB SAS storage in a half-height form factor

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.2 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size256GB
  • Dual Xeon E5-2699 v4 processors provide 22 cores each at 2.2 GHz
  • 256 GB DDR4 ECC memory supports virtualisation workloads with room to grow to 512 GB
  • PERC H330 RAID controller manages 2x 900 GB SAS drives for redundant storage
  • iDRAC8 Enterprise enables remote power, console and firmware updates
  • Blade form factor fits dense chassis deployments with 10 GbE 562T adapter

Dell PowerEdge M630 blade server

The Dell PowerEdge M630 is a dual-socket blade server built for dense compute environments. It ships with two Intel Xeon E5-2699 v4 processors running at 2.2 GHz and 256 GB of DDR4 memory. The unit includes a PERC H330 SAS storage controller and integrated graphics for management tasks.

Suited for virtualisation hosts

This configuration targets buyers who need high core counts and large memory capacity in a single blade slot. It is not for buyers who want more storage bays than the two 2.5-inch slots provided. It is not for builders who need a second GPU or additional PCIe expansion beyond the blade form factor.

Two 900 GB SAS hard drives installed

The server arrives with two 900 GB SAS drives spinning at 10K RPM. The PERC H330 controller manages these drives in RAID 0, RAID 1 or JBOD. Maximum supported memory is 512 GB across the available DIMM slots.

Helstu kostir

  • Dual Xeon E5-2699 v4 processors provide 22 cores each at 2.2 GHz
  • 256 GB DDR4 ECC memory supports virtualisation workloads with room to grow to 512 GB
  • PERC H330 RAID controller manages 2x 900 GB SAS drives for redundant storage
  • iDRAC8 Enterprise enables remote power, console and firmware updates
  • Blade form factor fits dense chassis deployments with 10 GbE 562T adapter

Tæknilýsing

BrandDELL
SeriesPowerEdge
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.2 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4 SDRAM
Max Memory Capacity512GB
Hard Drive (Installed)1.800,00
Storage ControllerDell PERC H330 SAS Storage Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 Enterprise
Dimensions22 x 22x 10 in
Weight20

Spurningar um þessa vöru

How is the M630 blade installed in a PowerEdge chassis and what step is often missed?

Slide the blade into an empty bay until the latch clicks, then use iDRAC8 Enterprise to verify the blade is powered and recognised by the chassis management module — skipping the iDRAC check leaves the blade invisible to the system.

Which components in this M630 will need replacement first during its service life?

The two 900 GB SAS 2.5-inch 10K hard drives and the PERC H330 RAID controller battery are the only field-replaceable parts with a predictable wear-out timeline.

What thermal or power limit appears first when both Xeon E5-2699 v4 CPUs run at 2.2 GHz continuously?

The chassis power budget and shared cooling capacity for the half-height blade form factor throttle the dual 22-core processors before either CPU hits its own thermal ceiling.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.