Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

DELL

DELL SNPVDFYDC16G 16 GB DDR4 2666 288-pin server RAM

SKU CH-QCVR-5YHY7 MPN SNPVDFYDC16G

A 16 GB DDR4-2666 ECC unbuffered DIMM for Dell servers, running at 1.20 V with 288 pins

  • 16 GB capacity for demanding server workloads
  • DDR4-2666 speed for high-throughput data processing
  • ECC protection detects and corrects memory errors
  • 20 V operation reduces power draw and heat
  • 288-pin DIMM fits standard DDR4 server slots

Dell 16 GB DDR4 2666 Server Memory

This Dell SNPVDFYDC16G module adds 16 GB of DDR4 memory to compatible Dell servers. It operates at 2666 MT/s with a PC4-21333 rating and runs at 1.20 V. The unbuffered ECC DIMM uses a 288-pin form factor for direct installation.

Sustained load behavior with ECC unbuffered design

Error-correcting code detects and corrects single-bit errors during continuous operation without buffer latency. The 1.20 V operating voltage helps maintain thermal stability across extended workloads. Unbuffered topology suits platforms that address memory directly without registered delays.

DDR4-2666 interface practical limits

The PC4-21333 standard caps transfer rates at 2666 MT/s regardless of higher-rated modules installed. Mixing speeds forces all modules to run at the lowest populated frequency or the system maximum. Capacity expansion stops at the platform's physical DIMM slots and memory controller address range.

Βασικά χαρακτηριστικά

  • 16 GB capacity for demanding server workloads
  • DDR4-2666 speed for high-throughput data processing
  • ECC protection detects and corrects memory errors
  • 20 V operation reduces power draw and heat
  • 288-pin DIMM fits standard DDR4 server slots

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

How much power does the 1.20 V DDR4 module draw when the server runs continuously?

The module operates at 1.20 V, the standard voltage for DDR4, which keeps power draw and heat low during all-day workloads.

What motherboard slot and memory type are required for this 288-pin DIMM to function?

Your motherboard must provide a DDR4 288-pin DIMM slot that supports unbuffered ECC memory at 2666 MT/s.

If I keep my existing 2133 MT/s DDR4 sticks, what speed will the new 2666 module run at?

When mixed, all modules operate at the lowest populated speed, so the 2666 MT/s stick will downclock to match your 2133 MT/s memory.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.