暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connectors and black memory chips

DELL

DELL SNPVDFYDC16G 16 GB DDR4 2666 288-pin server RAM

SKU CH-QCVR-5YHY7 MPN SNPVDFYDC16G

A 16 GB DDR4-2666 ECC unbuffered DIMM for Dell servers, running at 1.20 V with 288 pins

  • 16 GB capacity for demanding server workloads
  • DDR4-2666 speed for high-throughput data processing
  • ECC protection detects and corrects memory errors
  • 20 V operation reduces power draw and heat
  • 288-pin DIMM fits standard DDR4 server slots

Dell 16 GB DDR4 2666 Server Memory

This Dell SNPVDFYDC16G module adds 16 GB of DDR4 memory to compatible Dell servers. It operates at 2666 MT/s with a PC4-21333 rating and runs at 1.20 V. The unbuffered ECC DIMM uses a 288-pin form factor for direct installation.

Sustained load behavior with ECC unbuffered design

Error-correcting code detects and corrects single-bit errors during continuous operation without buffer latency. The 1.20 V operating voltage helps maintain thermal stability across extended workloads. Unbuffered topology suits platforms that address memory directly without registered delays.

DDR4-2666 interface practical limits

The PC4-21333 standard caps transfer rates at 2666 MT/s regardless of higher-rated modules installed. Mixing speeds forces all modules to run at the lowest populated frequency or the system maximum. Capacity expansion stops at the platform's physical DIMM slots and memory controller address range.

特長

  • 16 GB capacity for demanding server workloads
  • DDR4-2666 speed for high-throughput data processing
  • ECC protection detects and corrects memory errors
  • 20 V operation reduces power draw and heat
  • 288-pin DIMM fits standard DDR4 server slots

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much power does the 1.20 V DDR4 module draw when the server runs continuously?

The module operates at 1.20 V, the standard voltage for DDR4, which keeps power draw and heat low during all-day workloads.

What motherboard slot and memory type are required for this 288-pin DIMM to function?

Your motherboard must provide a DDR4 288-pin DIMM slot that supports unbuffered ECC memory at 2666 MT/s.

If I keep my existing 2133 MT/s DDR4 sticks, what speed will the new 2666 module run at?

When mixed, all modules operate at the lowest populated speed, so the 2666 MT/s stick will downclock to match your 2133 MT/s memory.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。