Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
E3D spoolWorks EDGE filament spool, 2.3 kg, very black, 1.75 mm

E3D Online

E3D Online spoolWorks EDGE Filament 1.75mm 2.3kg Very Black30

SKU CH-5YCG-SHEVT

A recyclable, PETG-based 1.75 mm filament supplied on a 2.3 kg spool that prints without fumes and bonds layers with near-isotropic strength

  • ColorBlack
  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • Easy printing with no unpleasant fumes or odours
  • Strong tough glossy finish produces durable parts
  • Reliable bed adhesion using only a little gluestick
  • Compatible with Scaffold support for clean breakaway

Edge Filament for Demanding Prints

E3D spoolWorks EDGE is a PETG-based filament engineered to combine ABS-like toughness with PLA-like ease of use. It suits makers who need durable, dimensionally accurate parts without managing a heated chamber or strong odours. The material prints cleanly and delivers strong layer adhesion for functional prototypes and end-use components. Its recyclable composition supports sustainable workshop practices.

1.75 mm Diameter Works With Standard Extruders

The 1.75 mm format fits the vast majority of direct-drive and Bowden extruders without hardware changes. Low contraction minimises warping on large flat surfaces, freeing you from enclosure requirements for many geometries. A light gluestick coating on the bed provides reliable first-layer adhesion across glass, PEI or coated build plates. Compatibility with Scaffold support material enables clean breakaway on complex overhangs and internal cavities.

2.3 kg Spool Sustains Long Production Runs

The large spool capacity reduces changeovers during extended prints or batch production of multiple parts. Consistent diameter control maintains steady extrusion pressure over many hours, preventing under-extrusion artefacts on tall models. Modified PETG chemistry resists heat creep in the hot end, supporting stable flow during multi-day print jobs. Toughness and inter-layer strength remain uniform from the first layer to the last metre of filament.

Βασικά χαρακτηριστικά

  • Recyclable PETG-based material reduces environmental impact
  • Easy printing with no unpleasant fumes or odours
  • Strong tough glossy finish produces durable parts
  • Reliable bed adhesion using only a little gluestick
  • Compatible with Scaffold support for clean breakaway

Προδιαγραφές

BrandE3D
ModelEdge
ColorBlack
TypeFilament

Ερωτήσεις για αυτό το προϊόν

How does the 2.3 kg spool weight affect the frequency of spool changes during long, continuous prints?

The 2.3 kg spool provides a large amount of material, reducing the number of spool changes needed for extended print jobs compared to smaller spools.

Does the filament produce noticeable odours or fumes when the printer runs all day?

The material is designed to print with no unpleasant fumes or odours, keeping the environment comfortable during long print sessions.

What bed preparation is required for the filament to adhere properly?

The filament adheres effectively to bed surfaces with just a little bit of gluestick, so a standard print bed and a glue stick are sufficient.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.