Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black 5.25 inch internal card reader with mesh front panel and USB 3.0 port

EN-Labs

EN-Labs U2CR525U3 5.25" Internal Card Reader USB 2.0 USB 3.0

SKU CH-19ZV-N5NSC

A 5.25" internal card reader supporting CF, XD, MS, M2, SD and TF cards with a front USB 3.0 port

  • Installation TypeInternal
  • ColorBlack
  • Support - Compact FlashYes
  • Support - Memory StickYes
  • Support - MMCYes
  • Support - SDYes
  • Reads CF, XD, MS, M2, SD and MicroSD cards
  • Maximum supported memory capacity of 64 GB
  • Fits any 5.25" drive bay with mesh front panel
  • Front USB 3.0 port delivers up to 5 Gbps transfer speed
  • Connects to motherboard via USB 2.0 and USB 3.0 headers

5.25" internal card reader for desktop PCs

The EN-Labs U2CR525U3 installs in a standard 5.25 inch bay to add multi-format card reading and writing to a desktop computer or server. It connects to the motherboard through a USB 2.0 header and includes a front-facing USB 3.0 port for additional peripherals. The mesh front panel design integrates with cases that use a similar aesthetic.

Supports cards up to 64 GB across CF, SD, MS, XD.

The reader handles CompactFlash I and II, Memory Stick, Memory Stick Pro, Memory Stick Duo, SD, SDHC, SDXC, MMC I, MMC II, xD and microSD (TF) formats. Maximum supported capacity is 64 GB per card. Data transfers over the card reader interface run at USB 2.0 480 Mbps speeds, while the front USB 3.0 port operates at up to 5 Gbps for connected USB devices.

Requires both USB 2.0

Full functionality needs a 9 or 10 pin USB 2.0 header for the card reader and a 20 pin USB 3.0 header for the front expansion port. Systems lacking either header cannot use the corresponding feature. The unit is USB powered and includes mounting screws for installation.

Βασικά χαρακτηριστικά

  • Reads CF, XD, MS, M2, SD and MicroSD cards
  • Maximum supported memory capacity of 64 GB
  • Fits any 5.25" drive bay with mesh front panel
  • Front USB 3.0 port delivers up to 5 Gbps transfer speed
  • Connects to motherboard via USB 2.0 and USB 3.0 headers

Προδιαγραφές

BrandEN-Labs
SeriesU2CR525U3
Installation TypeInternal
ColorBlack
Support - Compact FlashYes
Support - Memory StickYes
Support - MMCYes
Support - SDYes
Support - SmartMediaNo
Support - xDYes
FeaturesAdd memory card reading and writing support to your desktop computer or server through an internal 5.25" bay Unique design that blends well with any chassis that has a front mesh panel, Supports most standard memory cards including CF, MD, SM, XD, SD, SDHC, SDXC, MMC, MS, M2, and MicroSD(TF) Cards, USB 2.0 480Mbps Highspeed and wide compatibility make this multi-card reader an ideal solution for photo kiosks or photo labs, and desktop computers, Maximum capacity of the memory up to 32GB, Front USB 3.0 access lets you connect USB devices easily ,transfer speed up to 5Gbps, It is USB p
Package Contents5.25” USB2.0 card reader, 1x mounting screws bag

Ερωτήσεις για αυτό το προϊόν

Will the USB 2.0 480Mbps card reader still work if my motherboard only has a USB 2.0 9/10-pin header?

Yes, the card reader connects to a USB 2.0 motherboard header and runs at 480Mbps; the extra USB 3.0 port simply stays unused without a 20-pin header.

How can I confirm the reader is functioning after I install it in the 5.25" bay?

Insert a supported card — CF, XD, MS, M2, SD or TF — up to 64GB; it should appear in File Explorer and allow read and write operations.

What comes in the box and what must I source separately?

The package includes the 5.25" USB 2.0 card reader and a bag of mounting screws; you must provide a USB 2.0 9/10-pin motherboard header for the reader and a USB 3.0 20-pin header for the front USB 3.0 port.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.