Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Blue PLA filament spool, 1.75mm diameter, 1KG vacuum-sealed roll

FOCUSTEC

FOCUSTEC PLA 3D Printer Filament 1.75mm ±0.02mm 1KG Blue

SKU CH-44D3-ZG6RW

PLA filament with ±0.02 mm accuracy on a 1 kg spool, dried 24 hours and vacuum-sealed for clog-free printing

  • TypeAccessories
  • ±0.02 mm tolerance keeps extrusion steady and layers even
  • Low shrinkage reduces warping for dimensionally accurate parts
  • Tangle-free spooling prevents jams and under-extrusion
  • Vacuum-sealed after 24-hour drying ensures moisture-free filament
  • Clog-free patented formulation delivers smooth, glossy finishes

Filament for reliable everyday prints

This 1.75mm PLA spool is made for hobbyists and makers who want consistent results on common desktop printers. The tight ±0.02mm tolerance keeps extrusion steady so layers bond cleanly without constant babysitting. Vacuum-sealed packaging with desiccant means the material arrives dry and ready to load. It suits general-purpose models, prototypes and decorative parts printed at standard PLA temperatures.

Low shrinkage holds dimensions over long jobs

The formulation resists warping even when a print runs for many hours, so corners stay flat and tall features keep their shape. Consistent diameter prevents the feed-rate swings that cause thick-and-thin layers mid-print. Bridging performance stays predictable because the melt flow remains homogeneous from start to finish. You can leave a large build unattended without returning to a curled mess.

Check nozzle size and bed adhesion method

Verify your hot-end accepts 1.75mm stock and that your slicer profile matches standard PLA temperature ranges. A heated bed is not required but can help first-layer stick on glass or PEI surfaces. Ensure the spool hub fits your printer’s holder or have a separate roller ready. Store the opened spool in a dry box to maintain the low-moisture condition it ships in.

Βασικά χαρακτηριστικά

  • ±0.02 mm tolerance keeps extrusion steady and layers even
  • Low shrinkage reduces warping for dimensionally accurate parts
  • Tangle-free spooling prevents jams and under-extrusion
  • Vacuum-sealed after 24-hour drying ensures moisture-free filament
  • Clog-free patented formulation delivers smooth, glossy finishes

Προδιαγραφές

TypeAccessories

Ερωτήσεις για αυτό το προϊόν

Does the 1.75 mm filament stay within the ±0.02 mm tolerance during a full-day print without jamming?

The filament is manufactured to a ±0.02 mm tolerance and wound to avoid crossed turns, which the maker says prevents diameter changes that disrupt feed rate and cause clogging on long prints.

What must my printer support to use this 1 kg PLA spool?

Your printer needs a 1.75 mm filament path and a heated bed or build surface that works with standard PLA temperatures.

Will this blue PLA adhere well on an older glass bed without glue stick?

The material is described as having low shrinkage and good layer fusion, which helps first-layer adhesion on common surfaces such as glass.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.