Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Blue PLA filament spool, 1.75mm diameter, 1KG vacuum-sealed roll

FOCUSTEC

FOCUSTEC PLA 3D Printer Filament 1.75mm ±0.02mm 1KG Blue

SKU CH-44D3-ZG6RW

PLA filament with ±0.02 mm accuracy on a 1 kg spool, dried 24 hours and vacuum-sealed for clog-free printing

  • TypeAccessories
  • ±0.02 mm tolerance keeps extrusion steady and layers even
  • Low shrinkage reduces warping for dimensionally accurate parts
  • Tangle-free spooling prevents jams and under-extrusion
  • Vacuum-sealed after 24-hour drying ensures moisture-free filament
  • Clog-free patented formulation delivers smooth, glossy finishes

Filament for reliable everyday prints

This 1.75mm PLA spool is made for hobbyists and makers who want consistent results on common desktop printers. The tight ±0.02mm tolerance keeps extrusion steady so layers bond cleanly without constant babysitting. Vacuum-sealed packaging with desiccant means the material arrives dry and ready to load. It suits general-purpose models, prototypes and decorative parts printed at standard PLA temperatures.

Low shrinkage holds dimensions over long jobs

The formulation resists warping even when a print runs for many hours, so corners stay flat and tall features keep their shape. Consistent diameter prevents the feed-rate swings that cause thick-and-thin layers mid-print. Bridging performance stays predictable because the melt flow remains homogeneous from start to finish. You can leave a large build unattended without returning to a curled mess.

Check nozzle size and bed adhesion method

Verify your hot-end accepts 1.75mm stock and that your slicer profile matches standard PLA temperature ranges. A heated bed is not required but can help first-layer stick on glass or PEI surfaces. Ensure the spool hub fits your printer’s holder or have a separate roller ready. Store the opened spool in a dry box to maintain the low-moisture condition it ships in.

Puncte forte

  • ±0.02 mm tolerance keeps extrusion steady and layers even
  • Low shrinkage reduces warping for dimensionally accurate parts
  • Tangle-free spooling prevents jams and under-extrusion
  • Vacuum-sealed after 24-hour drying ensures moisture-free filament
  • Clog-free patented formulation delivers smooth, glossy finishes

Specificații

TypeAccessories

Întrebări despre acest articol

Does the 1.75 mm filament stay within the ±0.02 mm tolerance during a full-day print without jamming?

The filament is manufactured to a ±0.02 mm tolerance and wound to avoid crossed turns, which the maker says prevents diameter changes that disrupt feed rate and cause clogging on long prints.

What must my printer support to use this 1 kg PLA spool?

Your printer needs a 1.75 mm filament path and a heated bed or build surface that works with standard PLA temperatures.

Will this blue PLA adhere well on an older glass bed without glue stick?

The material is described as having low shrinkage and good layer fusion, which helps first-layer adhesion on common surfaces such as glass.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.