Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black and silver copper G1/4 inch fitting for 10x13 or 10x16mm soft tubing

FormulaMod

FormulaMod Fm-3FB 10x13/10x16mm Copper G1/4" Soft Tube Fitting

SKU CH-GZ9F-A19YV MPN Fm-3FB

Connects 10 mm inner-diameter soft tubing in 13 mm or 16 mm outer sizes with a copper G1/4 inch thread

  • TypeFittings
  • Fan SizeNo Fans
  • ColorBlack

Color Black

  • Black
  • Silver

Οι διαγραμμένες εκδόσεις υπάρχουν, αλλά δεν είναι διαθέσιμες εδώ.

  • Copper construction resists corrosion in liquid loops
  • G1/4" thread fits standard water-cooling components
  • Black finish matches dark-themed builds
  • Supports 10x13mm and 10x16mm soft tubing
  • Grain direction may vary between production batches

Compatible Soft-Tube Sizes

The FormulaMod Fm-3FB fitting accepts soft tubing with a 10 mm inner diameter and either a 13 mm or 16 mm outer diameter. It connects to any component that provides a standard G1/4" thread. The copper construction with a black finish suits custom loops where mixed tube wall thicknesses are used.

Thermal and Flow Characteristics

Copper conducts heat efficiently, so the fitting body does not become a thermal bottleneck in the loop. The smooth internal bore adds negligible restriction, keeping pump noise and power draw at the level dictated by the other components. No fans or active cooling are associated with this part.

Behaviour Under Sustained Load

During continuous circulation the fitting remains mechanically stable and maintains its seal at normal loop pressures. The copper material resists deformation and corrosion over long operating periods. Builders who need angled or rotary joints, or who require hard-tube compression fittings, must select different parts.

Βασικά χαρακτηριστικά

  • Copper construction resists corrosion in liquid loops
  • G1/4" thread fits standard water-cooling components
  • Black finish matches dark-themed builds
  • Supports 10x13mm and 10x16mm soft tubing
  • Grain direction may vary between production batches

Προδιαγραφές

SeriesN/A
TypeFittings
Fan SizeNo Fans
ColorBlack

Ερωτήσεις για αυτό το προϊόν

How do I install the FormulaMod Fm-3FB fitting onto 10x13mm or 10x16mm soft tubing, and what step is commonly missed?

Slide the compression ring over the tube, push the tube fully onto the barbed end until it seats against the body, then tighten the collar by hand plus a quarter turn with a wrench; the step often missed is confirming the tube sits flush against the internal shoulder before final tightening.

What maintenance or replacement will the FormulaMod Fm-3FB fitting need over time?

Inspect the internal O-ring annually for hardening or flattening; replace the O-ring if any coolant seepage appears at the collar joint, otherwise the copper body and G1/4" threads require no scheduled replacement.

What is the first limit that appears when the FormulaMod Fm-3FB fitting runs under sustained loop pressure and temperature cycles?

The primary limit is the soft tubing itself — prolonged heat and pressure can cause the 10x13mm or 10x16mm tube to harden or creep at the barb, risking seal loss before the copper fitting or G1/4" threads show any fatigue.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.