Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black and silver copper G1/4 inch fitting for 10x13 or 10x16mm soft tubing

FormulaMod

FormulaMod Fm-3FB 10x13/10x16mm Copper G1/4" Soft Tube Fitting

SKU CH-GZ9F-A19YV MPN Fm-3FB

Connects 10 mm inner-diameter soft tubing in 13 mm or 16 mm outer sizes with a copper G1/4 inch thread

  • TypeFittings
  • Fan SizeNo Fans
  • ColorBlack

Color Black

  • Black
  • Silver

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Copper construction resists corrosion in liquid loops
  • G1/4" thread fits standard water-cooling components
  • Black finish matches dark-themed builds
  • Supports 10x13mm and 10x16mm soft tubing
  • Grain direction may vary between production batches

Compatible Soft-Tube Sizes

The FormulaMod Fm-3FB fitting accepts soft tubing with a 10 mm inner diameter and either a 13 mm or 16 mm outer diameter. It connects to any component that provides a standard G1/4" thread. The copper construction with a black finish suits custom loops where mixed tube wall thicknesses are used.

Thermal and Flow Characteristics

Copper conducts heat efficiently, so the fitting body does not become a thermal bottleneck in the loop. The smooth internal bore adds negligible restriction, keeping pump noise and power draw at the level dictated by the other components. No fans or active cooling are associated with this part.

Behaviour Under Sustained Load

During continuous circulation the fitting remains mechanically stable and maintains its seal at normal loop pressures. The copper material resists deformation and corrosion over long operating periods. Builders who need angled or rotary joints, or who require hard-tube compression fittings, must select different parts.

Přednosti

  • Copper construction resists corrosion in liquid loops
  • G1/4" thread fits standard water-cooling components
  • Black finish matches dark-themed builds
  • Supports 10x13mm and 10x16mm soft tubing
  • Grain direction may vary between production batches

Specifikace

SeriesN/A
TypeFittings
Fan SizeNo Fans
ColorBlack

Otázky k tomuto produktu

How do I install the FormulaMod Fm-3FB fitting onto 10x13mm or 10x16mm soft tubing, and what step is commonly missed?

Slide the compression ring over the tube, push the tube fully onto the barbed end until it seats against the body, then tighten the collar by hand plus a quarter turn with a wrench; the step often missed is confirming the tube sits flush against the internal shoulder before final tightening.

What maintenance or replacement will the FormulaMod Fm-3FB fitting need over time?

Inspect the internal O-ring annually for hardening or flattening; replace the O-ring if any coolant seepage appears at the collar joint, otherwise the copper body and G1/4" threads require no scheduled replacement.

What is the first limit that appears when the FormulaMod Fm-3FB fitting runs under sustained loop pressure and temperature cycles?

The primary limit is the soft tubing itself — prolonged heat and pressure can cause the 10x13mm or 10x16mm tube to harden or creep at the barb, risking seal loss before the copper fitting or G1/4" threads show any fatigue.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.