Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black soft-tube water-cooling kit with three 1m tubes, ten compression fittings, two 90° elbows, a mini M2M adapter and a tube cutter

FormulaMod

FormulaMod Soft Tube Fitting Kit 10x13mm Black G1/4 Compression Combo

SKU CH-VMSB-4FT3W

Complete G1/4 water-cooling kit with three metres of 10x13mm soft tubing, ten compression fittings, two 90° elbows, a mini male-to-male joiner and a tube cutter

  • TypeCombo Kit
  • ColorBlack

Color Black

  • Complete water-cooling kit with tubing, fittings and cutter included
  • 10 mm inner and 13 mm outer diameter soft tubing for secure G1/4 compression seals
  • Three one-metre tubes, ten straight fittings, two 90° elbows and one mini M2M adapter supplied
  • Integrated tube cutter enables clean, square cuts for leak-free assembly
  • Compatible with new builds and upgrades using standard G1/4 threaded components

Complete Soft-Tube Kit for Custom Loops

This FormulaMod bundle supplies 10x13 mm soft tubing, ten G1/4 compression fittings, two 90° elbows, one mini male-to-male joiner and a dedicated tube cutter. Everything needed to assemble or refresh a water-cooling loop arrives in a single package. The kit suits both first-time builders and experienced modders updating an existing system.

Leak-Free Sealing With Standard G1/4 Threads

Compression fittings grip the 10x13 mm tube evenly around its circumference, creating a reliable seal on every G1/4 port without specialised tools. The included cutter produces clean, square ends that seat fully in each fitting, reducing the risk of coolant loss. No pump noise or thermal data apply because the kit contains no active components.

Pre-Cut Lengths and Angled Fittings Simplify Routing

Three one-metre tube sections let you trim exact runs for CPU blocks, radiators and reservoirs without waste. The 90° elbows enable tight bends around motherboard heatsinks or GPU back-plates where straight fittings would kink the tube. The mini joiner connects two fittings directly for compact bridge sections. No software, lighting or monitoring features are included.

Βασικά χαρακτηριστικά

  • Complete water-cooling kit with tubing, fittings and cutter included
  • 10 mm inner and 13 mm outer diameter soft tubing for secure G1/4 compression seals
  • Three one-metre tubes, ten straight fittings, two 90° elbows and one mini M2M adapter supplied
  • Integrated tube cutter enables clean, square cuts for leak-free assembly
  • Compatible with new builds and upgrades using standard G1/4 threaded components

Προδιαγραφές

TypeCombo Kit
ColorBlack

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

How do I install the 10x13mm soft tubing onto the G1/4 compression fittings without leaks?

Cut the tube square with the included cutter, slide the compression nut and olive onto the tube, push the tube fully onto the fitting barb until it seats against the internal stop, then hand-tighten the nut plus a quarter turn with a spanner; the step most people miss is not pushing the tube past the olive far enough to hit the stop.

Which parts of this kit will need replacement after extended use?

The 10x13mm soft tubing can harden or discolour over time and should be inspected annually; the EPDM O-rings inside the 10 compression fittings, two 90° fittings and one mini M2M fitting may also lose elasticity and are the typical service items.

What is the first limit I will hit when running this loop continuously under load?

The 10x13mm tubing has a lower burst-pressure rating than hard tube, so sustained high coolant temperatures combined with pump pressure will reach the tube's pressure-temperature limit before the G1/4 compression fittings or 90° elbows become restrictive.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.