Geometric Future M5 Vent Dual-Chamber PC Case Black/Yellow
- ATX Mid Tower
- Black/Yellow
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Geometric Future
Mid-tower case supports E-ATX boards, 460 mm graphics cards and 420 mm radiators with room for ten 120 mm fans
The Geometric Future M5 is a dual-chamber ATX mid-tower finished in black and grey with tempered glass panels. It accepts Extended ATX motherboards and graphics cards up to 460mm long. The chassis is built from 0.8-1.2mm steel throughout and includes a built-in display platform. Toolless panel removal simplifies assembly and maintenance.
Top and bottom mounts each support 360mm or 420mm radiators while the rear takes a 120mm or 140mm unit. Up to ten 120mm or 140mm fans can be installed across top, bottom, rear, side and motherboard-back locations. This layout moves large air volumes steadily through both chambers so component temperatures remain stable during extended workloads rather than spiking in short bursts.
The case caps CPU cooler height at 180mm and power supply length at 160mm. Radiator support tops out at 420mm on top and 360mm on the bottom, defining the practical ceiling for liquid-cooling loops. Builders needing longer power supplies, taller air coolers or larger radiators will need a different enclosure.
| Brand | Geometric Future |
|---|---|
| Series | M5 |
| Type | ATX Mid Tower |
| Color | Black / Grey |
| Motherboard Compatibility | Extended ATX |
| Fan Options | Top : 120/140mm x 3 Rear : 120 /140mm x1 Right Front : 120/140/160mm x1 Motherboard back : 120mm x2 Bottom : 120/140mm x 3 |
| Radiator Options | Top : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad |
| Max GPU Length | 460mm |
| Max CPU Cooler Height | 180mm |
| Max PSU Length | 160mm |
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
The top supports a 420mm radiator and three 120mm or 140mm fans, while the bottom takes a 360mm radiator and three more fans. Add one fan at the rear, one at the right front and two behind the motherboard tray for up to ten 120mm fans total, all on 0.8–1.2mm steel panels that resist vibration.
Extended ATX, ATX and smaller boards fit. The PSU mounts in a dedicated chamber and accepts units up to 160mm long. Graphics cards up to 460mm long clear the front radiator space, and CPU coolers up to 180mm tall clear the side panel.
Yes. A 360mm radiator mounts at the top or bottom, a 120mm or 140mm radiator fits the rear, and the 460mm GPU limit accommodates most triple-slot cards. The dual-chamber design routes cables behind the motherboard tray so older parts install cleanly.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;