Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black and grey mid-tower case with tempered glass side panel

Geometric Future

Geometric Future M5 Black Grey PC case

SKU CH-K001-PET7Y

Mid-tower case supports E-ATX boards, 460 mm graphics cards and 420 mm radiators with room for ten 120 mm fans

  • TypeATX Mid Tower
  • ColorBlack / Grey
  • Motherboard CompatibilityExtended ATX
  • Fan OptionsTop : 120/140mm x 3 Rear : 120 /140mm x1 Right Front : 120/1
  • Radiator OptionsTop : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad
  • Max GPU Length460mm

Model M5

Color Black / Grey

  • Supports 420 mm radiator for high-capacity liquid cooling
  • Accommodates E-ATX boards and 460 mm GPUs for large builds
  • Holds up to 10 x 120 mm fans for extensive airflow
  • 2 mm steel chassis provides rigid structure
  • Toolless panels enable quick internal access

Dual-chamber E-ATX mid-tower

The Geometric Future M5 is a dual-chamber ATX mid-tower finished in black and grey with tempered glass panels. It accepts Extended ATX motherboards and graphics cards up to 460mm long. The chassis is built from 0.8-1.2mm steel throughout and includes a built-in display platform. Toolless panel removal simplifies assembly and maintenance.

Sustained thermal capacity

Top and bottom mounts each support 360mm or 420mm radiators while the rear takes a 120mm or 140mm unit. Up to ten 120mm or 140mm fans can be installed across top, bottom, rear, side and motherboard-back locations. This layout moves large air volumes steadily through both chambers so component temperatures remain stable during extended workloads rather than spiking in short bursts.

Radiator and hardware limits

The case caps CPU cooler height at 180mm and power supply length at 160mm. Radiator support tops out at 420mm on top and 360mm on the bottom, defining the practical ceiling for liquid-cooling loops. Builders needing longer power supplies, taller air coolers or larger radiators will need a different enclosure.

Kohokohdat

  • Supports 420 mm radiator for high-capacity liquid cooling
  • Accommodates E-ATX boards and 460 mm GPUs for large builds
  • Holds up to 10 x 120 mm fans for extensive airflow
  • 2 mm steel chassis provides rigid structure
  • Toolless panels enable quick internal access

Tekniset tiedot

BrandGeometric Future
SeriesM5
TypeATX Mid Tower
ColorBlack / Grey
Motherboard CompatibilityExtended ATX
Fan OptionsTop : 120/140mm x 3
Rear : 120 /140mm x1
Right Front : 120/140/160mm x1
Motherboard back : 120mm x2
Bottom : 120/140mm x 3
Radiator OptionsTop : 360/420mm Rad
Rear : 120 /140mm Rad
Bottom : 360mm Rad
Max GPU Length460mm
Max CPU Cooler Height180mm
Max PSU Length160mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much heat can the top-mounted 420mm radiator and ten 120mm fans move during all-day loads?

The top supports a 420mm radiator and three 120mm or 140mm fans, while the bottom takes a 360mm radiator and three more fans. Add one fan at the rear, one at the right front and two behind the motherboard tray for up to ten 120mm fans total, all on 0.8–1.2mm steel panels that resist vibration.

Which motherboards, power supplies and graphics cards must I already own to fit this dual-chamber layout?

Extended ATX, ATX and smaller boards fit. The PSU mounts in a dedicated chamber and accepts units up to 160mm long. Graphics cards up to 460mm long clear the front radiator space, and CPU coolers up to 180mm tall clear the side panel.

Will my existing 360mm AIO and 3-slot GPU still fit if I keep them?

Yes. A 360mm radiator mounts at the top or bottom, a 120mm or 140mm radiator fits the rear, and the 460mm GPU limit accommodates most triple-slot cards. The dual-chamber design routes cables behind the motherboard tray so older parts install cleanly.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.