Geometric Future M5 Vent White ATX Mid Tower PC case
- ATX Mid Tower
- White
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Geometric Future
Mid-tower case with mesh front panel and tempered glass, dual-chamber layout for E-ATX boards, 430 mm GPU clearance, 180 mm CPU cooler height, 160 mm PSU depth.
The Geometric Future M5 Vent is a dual-chamber ATX mid-tower finished in black and yellow. It accepts Extended ATX motherboards and graphics cards up to 430 mm long. CPU coolers up to 180 mm tall and power supplies up to 160 mm deep also fit. The layout separates the motherboard tray from the power supply and drive bays for cleaner cable routing.
A full-height mesh front panel feeds air directly to intake fans and radiators. The top and front mounts each accept 360 mm or 420 mm radiators, while the bottom takes a 360 mm unit and the rear takes 120 mm or 140 mm. This coverage lets builders run custom loops or large AIOs without changing case geometry.
Up to 13 x 120 mm fans can be installed across top, bottom, rear, right-front and motherboard-back positions. The entire chassis uses 0.8–1.2 mm thick steel for rigidity. A built-in display platform on the right-front chamber provides a dedicated spot for small screens or decorative items.
| Brand | Geometric Future |
|---|---|
| Series | M5 Vent |
| Type | ATX Mid Tower |
| Color | Black/Yellow |
| Motherboard Compatibility | Extended ATX |
| Fan Options | Top : 120/140mm x 3 Rear : 120 /140mm x1 Right Front : 120/140/160mm x1 Motherboard back : 120mm x2 Bottom : 120/140mm x 3 |
| Radiator Options | Top : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad Front : 360mm Rad |
| Max GPU Length | 430mm |
| Max CPU Cooler Height | 180mm |
| Max PSU Length | 160mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
It lets you install virtually any modern graphics card, including most triple-fan models, without hitting the front panel or radiator mounts.
The top chamber fits a 360 mm or 420 mm radiator, while the bottom chamber accepts a 360 mm radiator, so you can run two thick AIOs simultaneously.
The case takes Extended ATX boards and power supplies up to 160 mm long, leaving room for cable routing behind the motherboard tray.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?