NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Gulfe
ATX replacement power supply for HP Pavilion P7-1010T and P7-1011 desktops with reduced depth, 24-pin ATX, 4-pin P4, three SATA and two LP4 connectors
This Gulfe ATX unit is built to replace the original power supply in HP Pavilion P7-1010T and P7-1011 desktop computers. It matches the required form factor and connector layout for those specific models. Buyers restoring or repairing either system can install it directly without adapter cables. It is not suitable for builds needing higher wattage or modern GPU power connectors beyond what the original design provided.
The supply uses a reduced-depth ATX design measuring 5.9 inches in height and 3.4 inches in width to fit tight legacy chassis. It accepts AC input from 115 or 230 volts at 47 to 63 hertz. Protection circuits include over-current and over-power safeguards. Hold-up time is rated at a minimum of 17 milliseconds at nominal load, with a rise time under 70 milliseconds.
The unit provides one 24-pin ATX connector, one 4-pin P4 12V connector, three SATA 15-pin connectors, two LP4 4-pin connectors, and one floppy 4-pin connector. This exact mix decides whether the unit powers your specific motherboard, drives and peripherals. Systems requiring additional PCIe power cables or more SATA ports cannot use this supply.
| Brand | Gulfe |
|---|---|
| Type | ATX |
| Fans | 1 |
| Weight | 2.5 |
This unit provides a 24 (20+4) pin ATX connector, a 4 pin P4-12V connector, three SATA 15 pin connectors, two LP4 4 pin connectors and one floppy 4 pin connector, covering the original HP wiring.
It guarantees the supply keeps voltages stable for at least 17 milliseconds after mains loss, giving the system enough time to save data or shut down cleanly during brief power dips.
The supply auto-switches between 115 V and 230 V mains, so it works on standard household circuits worldwide without a manual voltage selector.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;