Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Gulfe ATX power supply unit in black metal housing with single fan and cable bundle

Gulfe

Gulfe ATX power supply for HP Pavilion P7-1010T P7-1011

SKU CH-0AJA-KGKXG

ATX replacement power supply for HP Pavilion P7-1010T and P7-1011 desktops with reduced depth, 24-pin ATX, 4-pin P4, three SATA and two LP4 connectors

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy HP power supplies for P7-1010T and P7-1011 desktops
  • ATX reduced depth 5.9" height fits compact cases
  • Single fan with over current and over power protection
  • 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors
  • High efficiency 115/230 V input with low ripple and noise

Targeted Replacement for HP Desktops

This Gulfe ATX unit is built to replace the original power supply in HP Pavilion P7-1010T and P7-1011 desktop computers. It matches the required form factor and connector layout for those specific models. Buyers restoring or repairing either system can install it directly without adapter cables. It is not suitable for builds needing higher wattage or modern GPU power connectors beyond what the original design provided.

Reduced Depth ATX Form Factor

The supply uses a reduced-depth ATX design measuring 5.9 inches in height and 3.4 inches in width to fit tight legacy chassis. It accepts AC input from 115 or 230 volts at 47 to 63 hertz. Protection circuits include over-current and over-power safeguards. Hold-up time is rated at a minimum of 17 milliseconds at nominal load, with a rise time under 70 milliseconds.

Connector Set Determines Compatibility

The unit provides one 24-pin ATX connector, one 4-pin P4 12V connector, three SATA 15-pin connectors, two LP4 4-pin connectors, and one floppy 4-pin connector. This exact mix decides whether the unit powers your specific motherboard, drives and peripherals. Systems requiring additional PCIe power cables or more SATA ports cannot use this supply.

Přednosti

  • Replaces legacy HP power supplies for P7-1010T and P7-1011 desktops
  • ATX reduced depth 5.9" height fits compact cases
  • Single fan with over current and over power protection
  • 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors
  • High efficiency 115/230 V input with low ripple and noise

Specifikace

BrandGulfe
TypeATX
Fans1
Weight2.5

Otázky k tomuto produktu

Which connector set matches the HP Pavilion P7-1010T or P7-1011 motherboard?

This unit provides a 24 (20+4) pin ATX connector, a 4 pin P4-12V connector, three SATA 15 pin connectors, two LP4 4 pin connectors and one floppy 4 pin connector, covering the original HP wiring.

What does the 17 ms hold-up time mean for my desktop?

It guarantees the supply keeps voltages stable for at least 17 milliseconds after mains loss, giving the system enough time to save data or shut down cleanly during brief power dips.

What does the 115 / 230 V input range cap in practice?

The supply auto-switches between 115 V and 230 V mains, so it works on standard household circuits worldwide without a manual voltage selector.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.