NEMIX RAM
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
2TB kit of sixteen 128GB DDR5-5600 ECC RDIMMs at CL46 and 1.1V, registered 2Rx4 for full-capacity stability on the Supermicro H14SST-G
- Capacity2TB (16 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 2 TB total capacity from sixteen 128 GB modules
- DDR5-5600 speed with CL46 latency at 1.1 V
- Registered ECC design corrects single-bit errors automatically
- 288-pin RDIMM form factor matches Supermicro H14SST-G slots
- 2Rx4 organisation enables full 16-slot population
Exact-match DDR5-5600 server kit
This 2 TB kit contains 16 registered ECC RDIMMs, each 128 GB, built to the PC5-44800 standard at 1.1 V with CL46 timing. It is designed for the Supermicro H14SST-G motherboard and uses 288-pin DDR5 modules with 2Rx4 organisation for full-capacity population.
Verify population rules and slots
Check your motherboard manual for the approved DIMM installation order, maximum supported capacity per slot, and any BIOS version requirements before ordering. The board must accept 288-pin registered DDR5 RDIMMs and support 16 modules running at 5600 MT/s with ECC enabled.
Registered ECC architecture for dense configs
The registered design reduces electrical load on the memory controller so all 16 slots can run fully populated at rated speed, while on-die ECC corrects single-bit errors to prevent silent data corruption. No heat spreaders are fitted, so ensure chassis airflow meets the server's thermal specifications.
Přednosti
- 2 TB total capacity from sixteen 128 GB modules
- DDR5-5600 speed with CL46 latency at 1.1 V
- Registered ECC design corrects single-bit errors automatically
- 288-pin RDIMM form factor matches Supermicro H14SST-G slots
- 2Rx4 organisation enables full 16-slot population
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-724K16 |
| Capacity | 2TB (16 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 2TB 16X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
Does the 2TB kit arrive as sixteen 128GB RDIMMs or do I need to buy additional modules?
The kit contains sixteen 128GB DDR5-5600 ECC RDIMMs, giving 2TB total; no extra modules are required.
Should I choose the 2Rx4 CL46 1.1V version or a different rank or voltage for the Supermicro H14SST-G?
The board requires 288-pin registered DDR5 at 1.1V; this 2Rx4 CL46 kit matches the exact rank, voltage and timing the memory controller expects.
Will the DDR5-5600 CL46 rating actually run at 5600 MT/s once installed in the H14SST-G?
Yes, the modules are spec-matched to the motherboard's population rules, so all sixteen slots run at the rated 5600 MT/s with CL46 latency.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



