We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade

SKU CH-HP4K-PGA0J

2TB kit of sixteen 128GB DDR5-5600 ECC RDIMMs at CL46 and 1.1V, registered 2Rx4 for full-capacity stability on the Supermicro H14SST-G

  • Capacity2TB (16 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 2 TB total capacity from sixteen 128 GB modules
  • DDR5-5600 speed with CL46 latency at 1.1 V
  • Registered ECC design corrects single-bit errors automatically
  • 288-pin RDIMM form factor matches Supermicro H14SST-G slots
  • 2Rx4 organisation enables full 16-slot population

Exact-match DDR5-5600 server kit

This 2 TB kit contains 16 registered ECC RDIMMs, each 128 GB, built to the PC5-44800 standard at 1.1 V with CL46 timing. It is designed for the Supermicro H14SST-G motherboard and uses 288-pin DDR5 modules with 2Rx4 organisation for full-capacity population.

Verify population rules and slots

Check your motherboard manual for the approved DIMM installation order, maximum supported capacity per slot, and any BIOS version requirements before ordering. The board must accept 288-pin registered DDR5 RDIMMs and support 16 modules running at 5600 MT/s with ECC enabled.

Registered ECC architecture for dense configs

The registered design reduces electrical load on the memory controller so all 16 slots can run fully populated at rated speed, while on-die ECC corrects single-bit errors to prevent silent data corruption. No heat spreaders are fitted, so ensure chassis airflow meets the server's thermal specifications.

Highlights

  • 2 TB total capacity from sixteen 128 GB modules
  • DDR5-5600 speed with CL46 latency at 1.1 V
  • Registered ECC design corrects single-bit errors automatically
  • 288-pin RDIMM form factor matches Supermicro H14SST-G slots
  • 2Rx4 organisation enables full 16-slot population

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K16
Capacity2TB (16 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content2TB 16X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Does the 2TB kit arrive as sixteen 128GB RDIMMs or do I need to buy additional modules?

The kit contains sixteen 128GB DDR5-5600 ECC RDIMMs, giving 2TB total; no extra modules are required.

Should I choose the 2Rx4 CL46 1.1V version or a different rank or voltage for the Supermicro H14SST-G?

The board requires 288-pin registered DDR5 at 1.1V; this 2Rx4 CL46 kit matches the exact rank, voltage and timing the memory controller expects.

Will the DDR5-5600 CL46 rating actually run at 5600 MT/s once installed in the H14SST-G?

Yes, the modules are spec-matched to the motherboard's population rules, so all sixteen slots run at the rated 5600 MT/s with CL46 latency.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.