Five small rectangular blue OLED display boards with gold pins

Hosyond B011 0.96" OLED 128x64 I2C Blue 5 Pcs

SKU CH-CZ00-4GSJX

Pack of five 0.96″ OLED modules with 128×64 resolution, I²C interface, 3.3–5 V supply and SSD1306 driver for Arduino or Raspberry Pi projects

Self-luminous OLED needs no backlight for crisp text
96 inch 128x64 resolution gives high pixel density
>160° viewing angle stays readable from the side
I²C interface uses only two I/O pins
3V–5V logic works without level-shifting chips

23,99 $

0.00030992 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 375,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Hosyond B011 0.96" OLED Display Pack

This pack contains five Hosyond B011 OLED modules, each with a 0.96 inch 128x64 pixel blue display driven by the SSD1306 controller. The I2C interface requires only two I/O pins and operates from 3.3V to 5V DC. Each board draws 0.04W during normal use and 0.08W with the full screen lit. They are aimed at makers building compact readouts for microcontroller projects.

Suits Arduino, Pi and MCU prototypes.

These displays suit hobbyists adding status screens to Arduino Nano, R3, Mega, Raspberry Pi, 51 MCU or STM32 projects. The 128x64 resolution and monochrome blue output limit them to text, icons and simple charts. Projects needing colour, video playback, touch input or larger viewing areas should choose a different display technology.

128x64 SSD1306 I2C resolution and interface

The single specification that decides fit is the 128x64 pixel SSD1306 panel driven over I2C. This resolution and bus define the wiring, library support and graphics memory available. Verify your host has two free I/O pins and can supply 3.3V or 5V before purchasing.

Βασικά χαρακτηριστικά

Self-luminous OLED needs no backlight for crisp text
96 inch 128x64 resolution gives high pixel density
>160° viewing angle stays readable from the side
I²C interface uses only two I/O pins
3V–5V logic works without level-shifting chips

Προδιαγραφές

Brand	Hosyond
Part Number	B011

Ερωτήσεις για αυτό το προϊόν

How do I confirm the 0.96" OLED is working after wiring it to my Arduino?

Power the module at 3.3V–5V DC, run an I2C scanner to detect address 0x3C, then load a test sketch that fills the 128x64 pixel array; the blue self-luminous pixels should light without a backlight.

What comes in the pack and what extra parts are needed?

The box contains five 0.96" OLED modules with SSD1306 driver ICs in protective boxes; you must supply jumper wires, a 3.3V–5V microcontroller such as Arduino Nano, R3, Mega or Raspberry Pi, and a suitable library.

Which colour variant should I pick for best contrast in daylight?

Choose the blue version listed here; its self-luminous pixels give ultra-high contrast and a viewing angle greater than 160°, making small fonts easy to read even in bright conditions.

Επίσης σε αυτό το ράφι