Bare 3.5 inch SCSI hard drive silver metal casing

HP 347708-B22 147GB 15000 RPM Ultra320 SCSI 3.5" internal hard drive

SKU CH-H6S1-EF3M6 MPN 347708-B22

A 147 GB, 15 000 RPM Ultra320 SCSI drive with a 3.8 ms seek time for server workloads

PackagingBare Drive
InterfaceUltra320 SCSI
Capacity147GB
RPM15000 RPM
Average Seek Time3.8ms
FeaturesSome motherboards are not compatible with the SCSI interface

15,000 RPM spindle accelerates transaction-heavy workloads
Ultra320 SCSI interface delivers 320 MB/s throughput for server arrays
8 ms average seek cuts latency in database operations
147 GB capacity fits mission-critical datasets in 3.5" form factor
HP qualification process reduces firmware incompatibility and data-corruption risk

59,99 $

0.00078374 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 339,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Server storage drive

The HP 347708-B22 is a 147GB 3.5-inch internal hard drive spinning at 15000 RPM over an Ultra320 SCSI interface. It is built for servers that demand high transaction throughput and low latency. The bare drive ships without a tray and carries a one-year limited warranty.

Compatibility check

Verify that your motherboard or controller supports the Ultra320 SCSI interface and an 80-pin connector before ordering. Some motherboards are not compatible with this SCSI interface. The 3.5-inch form factor requires a matching drive bay.

Upgrade path

This drive replaces slower SCSI disks in existing Ultra320 environments where 15000 RPM and 3.8ms average seek time improve I/O response. The capacity jump from 146.8GB to 147GB is minimal, so the upgrade is worth it only when spindle speed and seek performance are the primary bottlenecks.

Βασικά χαρακτηριστικά

15,000 RPM spindle accelerates transaction-heavy workloads
Ultra320 SCSI interface delivers 320 MB/s throughput for server arrays
8 ms average seek cuts latency in database operations
147 GB capacity fits mission-critical datasets in 3.5" form factor
HP qualification process reduces firmware incompatibility and data-corruption risk

Προδιαγραφές

Brand	HP
Model	347708-B22
Packaging	Bare Drive
Interface	Ultra320 SCSI
Capacity	147GB
RPM	15000 RPM
Average Seek Time	3.8ms
Features	Some motherboards are not compatible with the SCSI interface. Please confirm which interface is appropriate for your system!
Usage	Ideal for Servers
Form Factor	3.5"
Βάρος αποστολής	2.27 kg
Διαστάσεις συσκευασίας	203 × 152 × 51 mm

Ερωτήσεις για αυτό το προϊόν

Does the bare drive include a tray or cables, or must they be purchased separately?

The unit is supplied as a bare drive only; the 80-pin SCA connector attaches directly to a hot-plug backplane, so no separate cables are needed, but a 3.5-inch carrier tray is required if your chassis does not already provide one.

Should I choose the 147 GB 15000 RPM Ultra320 SCSI model or a lower-speed alternative?

Select this 147 GB 15000 RPM Ultra320 SCSI drive when the server workload demands the highest sustained throughput and the lowest 3.8 ms average seek time; a slower spindle would reduce both random and sequential performance.

What does the 320 MB/s Ultra320 SCSI rating mean once the drive is installed in a server?

The 320 MB/s figure is the peak bus transfer rate; real-world throughput will be lower and depends on the SCSI controller, cable length, and the number of devices sharing the bus, but the 15000 RPM spindle and 3.8 ms seek keep the drive itself from becoming the bottleneck.

Επίσης σε αυτό το ράφι