Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Rectangular black tower duplicator with ten vertical SATA slots and front LCD panel

SPARTAN

SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB

SKU CH-V9AR-FB3MC

Standalone SATA duplicator clones one source drive to nine targets at up to 100 MB/s with a 128 MB buffer and LCD control

  • TypeHard Drive Duplicator
  • Target1 to 9
  • ControllerAthena Controller
  • Buffer Memory128M
  • Data Source ROM1 SATA Hard Drive Slot for Source Reading
  • Data Destination Burner9 SATA Hard Drive Slots for HDD to HDD Copy
  • Standalone operation copies drives without a PC
  • 9 target slots duplicate one source to nine drives at once
  • 128 MB buffer sustains up to 100 MB/s transfer speed
  • 20 x 2 LCD with four buttons shows progress and menus
  • Sector-by-sector clone includes partitions and boot sectors

Duplicator with nine target bays

The SPARTAN duplicator copies one source SATA drive to up to nine target drives simultaneously. It operates as a standalone unit with an Athena controller and 128 MB buffer, so no host computer is required. A 20 x 2 LCD and four push buttons provide status and control. Power is drawn from a 115-230 V AC supply at 50/60 Hz.

IT teams cloning fleets of 2.5

Suited for businesses, education and government that need sector-by-sector clones of FAT16/32, exFAT, NTFS or Linux ext2/3/4 volumes, including boot sectors. Three erase modes are available for secure sanitisation. Not for workflows that need more than nine targets per run or that require a 2.5-inch adapter, which is not included.

100 MB/s maximum copy speed

The manufacturer rates duplication at up to 100 MB per second, equivalent to 7.2 GB per minute, across all active target bays. Actual throughput will depend on the source and target drives used. This figure determines whether the unit meets your time window for batch cloning.

Βασικά χαρακτηριστικά

  • Standalone operation copies drives without a PC
  • 9 target slots duplicate one source to nine drives at once
  • 128 MB buffer sustains up to 100 MB/s transfer speed
  • 20 x 2 LCD with four buttons shows progress and menus
  • Sector-by-sector clone includes partitions and boot sectors

Προδιαγραφές

TypeHard Drive Duplicator
Target1 to 9
ControllerAthena Controller
Buffer Memory128M
Data Source ROM1 SATA Hard Drive Slot for Source Reading
Data Destination Burner9 SATA Hard Drive Slots for HDD to HDD Copy
Language SupportEnglish
Display20 x 2 LCD
Operating TypeStandalone
Power SupplyAC: 115-230 V, 50/60 Hz

Ερωτήσεις για αυτό το προϊόν

Do I need a separate adapter to use 2.5 inch SATA SSDs with the 9 target slots?

Yes, an optional converter is required for 2.5 inch SATA drives and is not included with the duplicator.

Will the Athena Controller recognise NTFS and ext4 partitions from older drives?

The duplicator supports fat16, fat32, exFAT, NTFS and Linux ext2, ext3, ext4 file systems for sector-by-sector copying.

How can I confirm the duplicator is copying at the rated 7.2 GB per minute?

The 20 x 2 LCD displays real-time progress and speed so you can verify the transfer rate during operation.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.