Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular black tower duplicator with ten vertical SATA slots and front LCD panel

SPARTAN

SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB

SKU CH-V9AR-FB3MC

Standalone SATA duplicator clones one source drive to nine targets at up to 100 MB/s with a 128 MB buffer and LCD control

  • TypeHard Drive Duplicator
  • Target1 to 9
  • ControllerAthena Controller
  • Buffer Memory128M
  • Data Source ROM1 SATA Hard Drive Slot for Source Reading
  • Data Destination Burner9 SATA Hard Drive Slots for HDD to HDD Copy
  • Standalone operation copies drives without a PC
  • 9 target slots duplicate one source to nine drives at once
  • 128 MB buffer sustains up to 100 MB/s transfer speed
  • 20 x 2 LCD with four buttons shows progress and menus
  • Sector-by-sector clone includes partitions and boot sectors

Duplicator with nine target bays

The SPARTAN duplicator copies one source SATA drive to up to nine target drives simultaneously. It operates as a standalone unit with an Athena controller and 128 MB buffer, so no host computer is required. A 20 x 2 LCD and four push buttons provide status and control. Power is drawn from a 115-230 V AC supply at 50/60 Hz.

IT teams cloning fleets of 2.5

Suited for businesses, education and government that need sector-by-sector clones of FAT16/32, exFAT, NTFS or Linux ext2/3/4 volumes, including boot sectors. Three erase modes are available for secure sanitisation. Not for workflows that need more than nine targets per run or that require a 2.5-inch adapter, which is not included.

100 MB/s maximum copy speed

The manufacturer rates duplication at up to 100 MB per second, equivalent to 7.2 GB per minute, across all active target bays. Actual throughput will depend on the source and target drives used. This figure determines whether the unit meets your time window for batch cloning.

Kohokohdat

  • Standalone operation copies drives without a PC
  • 9 target slots duplicate one source to nine drives at once
  • 128 MB buffer sustains up to 100 MB/s transfer speed
  • 20 x 2 LCD with four buttons shows progress and menus
  • Sector-by-sector clone includes partitions and boot sectors

Tekniset tiedot

TypeHard Drive Duplicator
Target1 to 9
ControllerAthena Controller
Buffer Memory128M
Data Source ROM1 SATA Hard Drive Slot for Source Reading
Data Destination Burner9 SATA Hard Drive Slots for HDD to HDD Copy
Language SupportEnglish
Display20 x 2 LCD
Operating TypeStandalone
Power SupplyAC: 115-230 V, 50/60 Hz

Kysymyksiä tästä tuotteesta

Do I need a separate adapter to use 2.5 inch SATA SSDs with the 9 target slots?

Yes, an optional converter is required for 2.5 inch SATA drives and is not included with the duplicator.

Will the Athena Controller recognise NTFS and ext4 partitions from older drives?

The duplicator supports fat16, fat32, exFAT, NTFS and Linux ext2, ext3, ext4 file systems for sector-by-sector copying.

How can I confirm the duplicator is copying at the rated 7.2 GB per minute?

The 20 x 2 LCD displays real-time progress and speed so you can verify the transfer rate during operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.