Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

HP

HP 765253-B21 4TB 3.5" SATA 7.2K HDD

SKU CH-5BBH-90A68 MPN 765253-B21

A 4 TB 3.5 inch SATA hard drive spinning at 7.2 K rpm with a 6 Gb/s transfer rate and hot-swap tray

  • 4 TB capacity stores large data sets
  • 5 inch form factor fits standard drive bays
  • SATA 6Gb/s interface provides reliable connectivity
  • 2K RPM spindle speed delivers steady throughput
  • Hot-swap tray enables drive changes without downtime

Capacity and interface

This 4 TB hard drive connects through a SATA 6 Gb/s link in a 3.5 inch form factor. It spins at 7.2 K rpm and uses 512e sector formatting. The hot-swap tray allows removal without powering down the server.

Suited for bulk storage not speed

The drive fits HP ProLiant bays that accept hot-swap 3.5 inch SATA disks and need high capacity for archives or backups. It is not for workloads that demand SSD latency or throughput. Systems without a 6 Gb/s SATA backplane or hot-swap cage cannot use the tray feature.

Hot-swap tray decides fit

The 765253-B21 part number identifies a drive carrier that only locks into HP hot-swap drive bays. If the chassis uses fixed-mount sleds or a different vendor's tray the drive will not install.

Βασικά χαρακτηριστικά

  • 4 TB capacity stores large data sets
  • 5 inch form factor fits standard drive bays
  • SATA 6Gb/s interface provides reliable connectivity
  • 2K RPM spindle speed delivers steady throughput
  • Hot-swap tray enables drive changes without downtime

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

Will the 3.5 inch form factor fit my standard drive bay?

Yes, the 3.5 inch form factor matches standard internal drive bays used in servers and workstations.

How do I install the hot swap tray correctly?

Slide the drive into the hot swap tray until the SATA connector seats firmly, then lock the carrier latch to prevent disconnection during operation.

When should I plan to replace this 7.2K RPM hard drive?

Replace the drive if SMART attributes show reallocated sectors or if sustained throughput drops below expected levels for a 6Gb/s SATA interface.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.